Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Compact black ABS case with four USB-A ports and pogo pins for Raspberry Pi Zero

LORDWORLD

LORDWORLD USB Hub HAT (B) for Raspberry Pi Zero — 4× USB 2.0/1.1

SKU CH-JAP6-R5GKR

Adds four USB 2.0 ports to Raspberry Pi Zero boards via pogo pins in a snap-fit ABS case

  • Add four USB ports to a Raspberry Pi Zero with a pogo-pin HAT
  • Direct GPIO connection via spring-loaded pins for Zero, Zero W and Zero WH
  • Four ports support USB 2.0 and 1.1 peripherals
  • Snap-on lid with rounded edges for tool-free enclosure
  • ABS shell with dull-polish finish resists fingerprints

Designed for Raspberry Pi Zero

The LORDWORLD USB Hub HAT (B) adds four USB 2.0/1.1 ports to any Raspberry Pi Zero series board. It connects through pogo pins that press directly against the Zero, Zero W or Zero WH without soldering. The enclosure uses rounded ABS plastic with a dull-polish, anti-fingerprint finish and a simple snap-on lid.

Upgrading from the single USB OTG port

The stock Zero boards expose only one micro-USB OTG connection, which limits peripheral count. This HAT replaces that single link with four full-size Type-A sockets, so a keyboard, mouse, storage and a network dongle can run together. The jump is worth it when a project needs simultaneous USB devices and the Pi must stay inside a compact case.

Check your Zero model and power budget

Verify you have a Zero, Zero W or Zero WH; the pogo pin layout matches only those boards. Ensure your power supply can deliver enough current for the Pi plus every attached USB device, because the HAT draws bus power from the Pi itself. No driver installation is required on standard Raspberry Pi OS images.

Punti di forza

  • Add four USB ports to a Raspberry Pi Zero with a pogo-pin HAT
  • Direct GPIO connection via spring-loaded pins for Zero, Zero W and Zero WH
  • Four ports support USB 2.0 and 1.1 peripherals
  • Snap-on lid with rounded edges for tool-free enclosure
  • ABS shell with dull-polish finish resists fingerprints

Caratteristiche tecniche

BrandLORDWORLD

Domande su questo articolo

Does the case lid snap on without screws?

The lid uses a simple snap design with rounded angles and no screws are required to close the ABS enclosure.

How does the HAT connect to the Raspberry Pi Zero without a header?

Pogo pins on the underside mate directly with the Zero board pads so no soldered GPIO header is needed.

Will the four USB ports still work if I later upgrade to a newer Zero board?

The hub is compatible with the Zero series including Zero W and Zero WH, so it will continue to provide four USB 2.0/1.1 ports on those models.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.