Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green rectangular circuit board with 20-pin ATX connector and compact components

MorexLab

MorexLab MX-0608 60W / 80W DC-DC Power Supply Board 12V 20-pin ATX Mini-ITX

SKU CH-X3ZH-P1E38

A 12V DC-DC board delivering up to 80.2W through a 20-pin ATX connector for Mini-ITX builds

  • TypeAT
  • 12 V DC input powers compact Mini-ITX builds efficiently
  • 2 W maximum output supports low-power CPUs and boards
  • 20-to-24 pin modular connector fits standard ATX motherboards
  • 156 mm × 30 mm × 19 mm board slides into tight enclosures
  • Direct replacement for Morex 60 W and 80 W chassis

Compact DC-DC power board for Mini-ITX builds

The MorexLab MX-0608 is a 12V DC-DC power supply board rated at 60W continuous with an 80.2W maximum output. It uses a 20-pin ATX connector and includes a 12-inch modular 20+4-pin adapter cable. The board measures 156mm by 30mm by 19mm and fits directly into compatible Morex enclosures.

Included modular cable adapts the 20-pin output

A 12-inch 20-to-24-pin modular cable ships with the board, letting you connect the 20-pin header to a standard 24-pin motherboard socket. This single accessory removes the need to source a separate adapter for ATX-compatible Mini-ITX boards. No additional software, mounting brackets or power bricks are bundled.

Verify enclosure fit and 12V source capacity

Check that your chassis can accommodate a board 156mm long, 30mm wide and 19mm thick. Confirm your 12V DC source can deliver enough current for the 80.2W peak load. The operating range tops out at 45°C, so ensure adequate airflow inside the case. This unit is not suited for builds requiring higher wattage or standard AC-input PSUs.

Punti di forza

  • 12 V DC input powers compact Mini-ITX builds efficiently
  • 2 W maximum output supports low-power CPUs and boards
  • 20-to-24 pin modular connector fits standard ATX motherboards
  • 156 mm × 30 mm × 19 mm board slides into tight enclosures
  • Direct replacement for Morex 60 W and 80 W chassis

Caratteristiche tecniche

TypeAT

Domande su questo articolo

Will the 20-to-24-pin modular connector need replacing after extended use?

The included 12-inch 20-to-24-pin modular connector is a passive cable assembly with no moving parts, so it does not require scheduled replacement under normal operation.

At sustained load does the 80.2 W peak output or the 45 °C operating limit become the bottleneck first?

The 80.2 W maximum power output is the primary limit; the board must stay within the 0–45 °C ambient range, so sustained loads near 80 W require adequate case airflow to avoid thermal throttling.

How much heat and noise does the fanless 156 × 30 × 19 mm board produce when running 24/7?

With no fan the unit is silent; all 80 W of waste heat is dissipated through the PCB and enclosure, so chassis ventilation must handle the full thermal load during continuous operation.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.