Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green rectangular circuit board with 20-pin ATX connector and compact components

MorexLab

MorexLab MX-0608 60W / 80W DC-DC Power Supply Board 12V 20-pin ATX Mini-ITX

SKU CH-X3ZH-P1E38

A 12V DC-DC board delivering up to 80.2W through a 20-pin ATX connector for Mini-ITX builds

  • TypeAT
  • 12 V DC input powers compact Mini-ITX builds efficiently
  • 2 W maximum output supports low-power CPUs and boards
  • 20-to-24 pin modular connector fits standard ATX motherboards
  • 156 mm × 30 mm × 19 mm board slides into tight enclosures
  • Direct replacement for Morex 60 W and 80 W chassis

Compact DC-DC power board for Mini-ITX builds

The MorexLab MX-0608 is a 12V DC-DC power supply board rated at 60W continuous with an 80.2W maximum output. It uses a 20-pin ATX connector and includes a 12-inch modular 20+4-pin adapter cable. The board measures 156mm by 30mm by 19mm and fits directly into compatible Morex enclosures.

Included modular cable adapts the 20-pin output

A 12-inch 20-to-24-pin modular cable ships with the board, letting you connect the 20-pin header to a standard 24-pin motherboard socket. This single accessory removes the need to source a separate adapter for ATX-compatible Mini-ITX boards. No additional software, mounting brackets or power bricks are bundled.

Verify enclosure fit and 12V source capacity

Check that your chassis can accommodate a board 156mm long, 30mm wide and 19mm thick. Confirm your 12V DC source can deliver enough current for the 80.2W peak load. The operating range tops out at 45°C, so ensure adequate airflow inside the case. This unit is not suited for builds requiring higher wattage or standard AC-input PSUs.

Puntos fuertes

  • 12 V DC input powers compact Mini-ITX builds efficiently
  • 2 W maximum output supports low-power CPUs and boards
  • 20-to-24 pin modular connector fits standard ATX motherboards
  • 156 mm × 30 mm × 19 mm board slides into tight enclosures
  • Direct replacement for Morex 60 W and 80 W chassis

Especificaciones

TypeAT

Preguntas sobre este artículo

Will the 20-to-24-pin modular connector need replacing after extended use?

The included 12-inch 20-to-24-pin modular connector is a passive cable assembly with no moving parts, so it does not require scheduled replacement under normal operation.

At sustained load does the 80.2 W peak output or the 45 °C operating limit become the bottleneck first?

The 80.2 W maximum power output is the primary limit; the board must stay within the 0–45 °C ambient range, so sustained loads near 80 W require adequate case airflow to avoid thermal throttling.

How much heat and noise does the fanless 156 × 30 × 19 mm board produce when running 24/7?

With no fan the unit is silent; all 80 W of waste heat is dissipated through the PCB and enclosure, so chassis ventilation must handle the full thermal load during continuous operation.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.