Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Sleeved adapter cable with 14-pin, 10-pin and 24-pin connectors, 63cm long

myVolts

myVolts 14 Pin + 10 Pin to 24 Pin ATX PSU Adapter Cable 63cm

SKU CH-818M-8TN88

Adapts Corsair AXI, HXI, RM (old yellow label) and AX1200 modular PSUs with 14-pin and 10-pin outputs to standard 24-pin motherboard connectors using 18 AWG sleeved cable, 63 cm long

  • TypeAT
  • Converts 14+10 pin PSU to standard 24 pin motherboard
  • 63 cm sleeved cable with 18 AWG copper conductors
  • Self-adhesive tape included for tidy cable routing
  • Designed for Corsair AXI HXI and AX1200 power supplies
  • Only use with listed 14+10 pin modular PSUs

Corsair PSU adapter cable

This 63 cm sleeved adapter converts the 14 pin and 10 pin modular ports on compatible Corsair AXI, HXI and legacy RM or AX1200 power supplies into a standard 24 pin ATX connector for the motherboard. It uses 18 AWG tin-coated copper wire and includes self-adhesive tape for securing the cable run.

Fits Corsair modular PSUs

The cable plugs directly into the 14 pin and 10 pin sockets on the power supply and presents a single 24 pin header for any ATX motherboard, freeing the builder from sourcing a matching Corsair Type 4 cable set. No additional connectors or tools are required beyond the supplied tape.

Replaces missing Type 4 cables

The jump is worth it when a compatible Corsair unit lacks its original 24 pin cable or when repurposing the PSU in a standard ATX build. It is not for power supplies that use a single 24 pin modular port, nor for non-Corsair units where the pin-out differs and damage would result.

Punti di forza

  • Converts 14+10 pin PSU to standard 24 pin motherboard
  • 63 cm sleeved cable with 18 AWG copper conductors
  • Self-adhesive tape included for tidy cable routing
  • Designed for Corsair AXI HXI and AX1200 power supplies
  • Only use with listed 14+10 pin modular PSUs

Caratteristiche tecniche

TypeAT

Domande su questo articolo

Will the 18 AWG wires overheat if the 24 pin connector draws full load all day?

The cable uses 1007-18AWG tin-coated copper rated for the current a standard 24 pin motherboard connector can request.

Does the sleeved 63 cm length add noticeable heat or noise inside a closed case?

The adapter is a passive cable with no fan or active components, so it produces no noise and adds negligible heat.

Which power supply must I already own for this 14 pin + 10 pin adapter to work?

It only fits Corsair AXI, HXI, RM (old yellow-label) and AX1200 units that expose both a 14 pin and a 10 pin modular port.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.