Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black sleeved cable with 18-pin and 10-pin connectors joining a 24-pin ATX plug, 63cm long

myVolts

myVolts 18 Pin + 10 Pin to 24 Pin ATX Power Adapter Cable 63cm

SKU CH-23XC-W3AN1

Converts 18-pin and 10-pin PSU connectors to a standard 24-pin ATX motherboard connection using 18 AWG sleeved cable at 63 cm length

  • TypeAT
  • Converts Corsair 18+10 pin PSU to standard 24 pin motherboard
  • 63 cm sleeved cable with 18 AWG conductors for reliable power delivery
  • Includes self-adhesive tape for tidy cable management
  • Designed exclusively for listed Corsair RMX RMi SF HX series units
  • Single adapter connects both 18 pin and 10 pin modular ports

Corsair PSU adapter cable

This adapter converts the proprietary 18 pin and 10 pin modular connectors found on compatible Corsair power supplies into a standard 24 pin ATX motherboard connector. It is intended for builders using a Corsair RMX, RMi, SF or HX series unit with a regular ATX board. The cable is not universal and will not work with power supplies from other brands or unlisted Corsair models.

1007 18AWG wire gauge

The cable uses 1007 18AWG tin-coated copper conductors rated for the current delivered through a 24 pin ATX connection. At 63 centimetres long it reaches most motherboard sockets without excess slack. The sleeved construction helps reduce clutter and improves airflow inside the case. No active cooling or power regulation is present on the adapter itself.

Self-adhesive tape included

A single piece of self-adhesive tape is supplied to secure the cable run against the chassis or routing channels. The tape aids cable management but does not affect electrical performance. No additional software, drivers or configuration tools are provided or required for this passive adapter.

Punti di forza

  • Converts Corsair 18+10 pin PSU to standard 24 pin motherboard
  • 63 cm sleeved cable with 18 AWG conductors for reliable power delivery
  • Includes self-adhesive tape for tidy cable management
  • Designed exclusively for listed Corsair RMX RMi SF HX series units
  • Single adapter connects both 18 pin and 10 pin modular ports

Caratteristiche tecniche

TypeAT

Domande su questo articolo

How do I install the 18-pin and 10-pin connectors into my Corsair RMX, RMi, SF, or HX series PSU, and what is the common mistake?

Align each connector with its matching modular port on the PSU and press firmly until it clicks; the common mistake is forcing a connector into the wrong port, which can damage pins.

What maintenance or replacement will this 63 cm adapter cable need over time?

Inspect the 18 AWG sleeved cable and connectors periodically for fraying, discoloration, or loose pins; replace the cable if any damage appears.

What limit appears first when this adapter runs continuously at high load?

The 18 AWG conductors set the current-carrying limit; sustained loads near the PSU's maximum 24-pin rating will hit wire-temperature limits before the connectors do.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.