Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

myVolts

myVolts TFX 420W Power Supply for FSP FSP250-50SAV

SKU CH-A3KP-TK7PW

TFX form-factor replacement delivering up to 420 W with 20+4-pin motherboard, 4-pin CPU, two Molex, floppy and two SATA connectors for slimline and SFF systems

  • TypeAT
  • Delivers 420 W maximum output for demanding components
  • TFX form factor fits slimline and SFF chassis
  • Replaces 200, 250, 300 or 350 W units directly
  • 80 mm double ball-bearing fan keeps temperatures low
  • 20+4 pin, 4-pin CPU, 2× Molex, floppy, 2× SATA connectors

TFX 420W Replacement PSU

This TFX form-factor power supply replaces the FSP FSP250-50SAV unit in slimline and small-form-factor desktops. It fits systems that originally shipped with 200, 250, 300 or 350 watt power supplies. The 80 mm double ball-bearing fan provides active cooling. Input voltage ranges from 100 to 240 volts.

Capacity and headroom

Maximum output is 420 watts, giving headroom above the original 250 watt rating and common 300 or 350 watt replacements. It comfortably powers typical office peripherals and integrated graphics. High-end discrete graphics cards or multiple drives may exceed the available power.

Connector complement

The unit supplies a 20+4 pin motherboard connector, a 4-pin CPU connector, two Molex connectors, a floppy connector and two SATA connectors. Builds requiring PCIe power cables or additional SATA ports cannot use this supply.

Punti di forza

  • Delivers 420 W maximum output for demanding components
  • TFX form factor fits slimline and SFF chassis
  • Replaces 200, 250, 300 or 350 W units directly
  • 80 mm double ball-bearing fan keeps temperatures low
  • 20+4 pin, 4-pin CPU, 2× Molex, floppy, 2× SATA connectors

Caratteristiche tecniche

TypeAT

Domande su questo articolo

Will this 420 W TFX unit fit the same mounting holes and power my existing motherboard that currently uses a 250 W FSP supply?

It is a direct replacement for the FSP FSP250-50SAV and fits slimline and SFF cases that accept TFX form-factor units.

How can I confirm the 80 mm double ball-bearing fan is spinning correctly after installation?

Listen for the fan at the rear vent; it should start immediately when the system powers on and run continuously.

Does the box include a 20+4 pin motherboard connector, 4-pin CPU plug, two Molex, a floppy lead and two SATA cables?

Yes, all those connectors are attached to the unit; no extra cables are required for a typical build.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.