SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00501632BTC
Disponibile
NEMIX RAM
NEMIX RAM 1.5TB DDR5 5600 ECC RDIMM 16x96GB CL46 1.1V Supermicro H13SSH-E memory upgrade
A 1.5 TB DDR5 ECC registered server memory kit with sixteen 96 GB modules at 5600 MT/s, CL46, 1.1 V, verified for the Supermicro H13SSH-E motherboard
- Capacity1.5TB (16 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 5 TB total capacity from sixteen 96 GB modules for maximum server density
- DDR5 5600 speed with CL46 latency matches the board's rated timing
- Registered ECC architecture offloads the memory controller and corrects single-bit errors
- 1 V operation at 2Rx4 rank aligns with the platform's voltage and population rules
- 288-pin RDIMM form factor fits the Supermicro H13SSH-E motherboard exactly
Exact-fit DDR5 kit for Supermicro H13SSH-E
This 1.5TB kit contains sixteen 96GB DDR5 5600 RDIMM modules built to the motherboard’s registered ECC specification. It targets administrators who need the full 1.5TB capacity in a single validated purchase.
288-pin registered design with 2Rx4 organization
Each module runs at 1.1V with CL46 latency and uses major OEM DRAM from Samsung, Micron or Hynix. The registered architecture buffers address and command signals so all sixteen slots can be populated without overloading the memory controller, while on-die ECC corrects single-bit errors before they reach the OS.
Replaces partial or mixed-capacity configurations
Moving to a uniform 16 x 96GB population removes the bandwidth penalties and rank-mismatch risks that appear when smaller RDIMMs are mixed across channels. The jump is worth it when the workload demands the full 1.5TB address space at the board’s native DDR5 5600 speed.
Punti di forza
- 5 TB total capacity from sixteen 96 GB modules for maximum server density
- DDR5 5600 speed with CL46 latency matches the board's rated timing
- Registered ECC architecture offloads the memory controller and corrects single-bit errors
- 1 V operation at 2Rx4 rank aligns with the platform's voltage and population rules
- 288-pin RDIMM form factor fits the Supermicro H13SSH-E motherboard exactly
Caratteristiche tecniche
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K16 |
| Capacity | 1.5TB (16 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Domande su questo articolo
Does this kit run at the DDR5 5600 (PC5-44800) speed on the Supermicro H13SSH-E?
Yes — the 16 modules are spec-matched to DDR5 5600 (PC5-44800) with CL46 latency and 1.10 V, so the board recognises the full 1.5 TB capacity at its rated speed.
What physical slot and form factor does each 96 GB module require?
Each module is a 288-pin DDR5 RDIMM (Registered DIMM); the H13SSH-E takes only RDIMMs, not UDIMMs or SODIMMs.
In what order should I populate the 16 slots to avoid a boot failure?
Follow the motherboard manual's DIMM population sequence for 16 RDIMMs; the most common mistake is filling slots out of the prescribed order, which prevents the system from posting.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 USD
0.00095965BTC
Disponibile