暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Sixteen bare green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1.5TB DDR5 5600 ECC RDIMM 16x96GB CL46 1.1V Supermicro H13SSH-E memory upgrade

SKU CH-K8GD-RYBPX

A 1.5 TB DDR5 ECC registered server memory kit with sixteen 96 GB modules at 5600 MT/s, CL46, 1.1 V, verified for the Supermicro H13SSH-E motherboard

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 5 TB total capacity from sixteen 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank aligns with the platform's voltage and population rules
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E motherboard exactly

Exact-fit DDR5 kit for Supermicro H13SSH-E

This 1.5TB kit contains sixteen 96GB DDR5 5600 RDIMM modules built to the motherboard’s registered ECC specification. It targets administrators who need the full 1.5TB capacity in a single validated purchase.

288-pin registered design with 2Rx4 organization

Each module runs at 1.1V with CL46 latency and uses major OEM DRAM from Samsung, Micron or Hynix. The registered architecture buffers address and command signals so all sixteen slots can be populated without overloading the memory controller, while on-die ECC corrects single-bit errors before they reach the OS.

Replaces partial or mixed-capacity configurations

Moving to a uniform 16 x 96GB population removes the bandwidth penalties and rank-mismatch risks that appear when smaller RDIMMs are mixed across channels. The jump is worth it when the workload demands the full 1.5TB address space at the board’s native DDR5 5600 speed.

特長

  • 5 TB total capacity from sixteen 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank aligns with the platform's voltage and population rules
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E motherboard exactly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

Does this kit run at the DDR5 5600 (PC5-44800) speed on the Supermicro H13SSH-E?

Yes — the 16 modules are spec-matched to DDR5 5600 (PC5-44800) with CL46 latency and 1.10 V, so the board recognises the full 1.5 TB capacity at its rated speed.

What physical slot and form factor does each 96 GB module require?

Each module is a 288-pin DDR5 RDIMM (Registered DIMM); the H13SSH-E takes only RDIMMs, not UDIMMs or SODIMMs.

In what order should I populate the 16 slots to avoid a boot failure?

Follow the motherboard manual's DIMM population sequence for 16 RDIMMs; the most common mistake is filling slots out of the prescribed order, which prevents the system from posting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。