Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Four green DDR4 UDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 128GB 4x32GB DDR4 3200MHz PC4-25600 CL22 ECC UDIMM memory upgrade

SKU CH-NP1W-F53MP

128 GB kit of four 32 GB DDR4 3200 MHz ECC UDIMMs at CL22 and 1.2 V for Supermicro X12STE-F and X12STD-F motherboards

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB total capacity from four 32 GB modules for high-density workloads
  • DDR4 3200 MHz PC4-25600 speed matches the board's rated frequency
  • CL22 latency at 1.20 V delivers stable timing the controller expects
  • ECC UDIMM corrects single-bit errors to protect data integrity
  • Verified fitment for Supermicro X12STE-F and X12STD-F motherboards

Supermicro X12STE-F/X12STD-F upgrade

This 128GB kit uses four 32GB DDR4 3200MHz PC4-25600 ECC unbuffered UDIMMs built for Supermicro X12STE-F and X12STD-F motherboards. The modules run at 1.2V with CL22 timing and a 2Rx8 rank layout that matches the board's memory controller expectations. Error-correcting code protects data integrity for workloads that cannot tolerate silent corruption.

Exact-match replacement for mixed kits

The kit replaces mismatched or lower-capacity DIMMs that force the system to run at reduced speeds or disable ECC. Populating all four slots with identical 2Rx8 modules lets the controller train at the rated 3200MHz without downclocking. Builders who need registered RDIMMs or laptop SODIMMs cannot use this product.

Sustained ECC operation at rated speed

Under continuous load the unbuffered design keeps latency low while ECC corrects single-bit errors in real time. The 1.2V operating voltage stays within the motherboard's standard power envelope during extended sessions. Systems requiring higher frequencies or lower latencies than CL22 will not achieve those targets with this memory.

Punti di forza

  • 128 GB total capacity from four 32 GB modules for high-density workloads
  • DDR4 3200 MHz PC4-25600 speed matches the board's rated frequency
  • CL22 latency at 1.20 V delivers stable timing the controller expects
  • ECC UDIMM corrects single-bit errors to protect data integrity
  • Verified fitment for Supermicro X12STE-F and X12STD-F motherboards

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME25600-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR4 3200MHz PC4-25600 2Rx8 1.2V 288-PIN ECC UDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Will the 288-pin DDR4 UDIMM modules fit the Supermicro X12STE-F motherboard?

Yes, the 288-pin DDR4 ECC UDIMM form factor matches the motherboard's DIMM slots exactly. The kit is verified for the X12STE-F and X12STD-F boards and is not an RDIMM or SODIMM.

What is the correct installation order for the four 32GB modules on the X12STE-F?

The motherboard manual defines the approved DIMM population order for 2Rx8 modules. Follow that sequence so the memory controller recognises the full 128GB at the rated 3200MHz speed.

Do these ECC UDIMMs require any firmware updates or ongoing maintenance after installation?

No firmware updates are needed for the memory itself. The modules run at 1.2V with CL22 timing. If a module ever fails, the lifetime replacement warranty covers a swap.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.