NEMIX RAM 8GB (2x4GB) DDR3 1866 CL13 1.35V 240-Pin UDIMM Kit
- 8GB (2 x 4GB)
- 240-Pin DDR3 UDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
A 16 GB DDR3 SODIMM kit of four 4 GB modules running at 1333 MHz with CL9 latency for laptop upgrades
Capacity 16GB (4 x 4GB)
This NEMIX RAM kit supplies 16 GB of DDR3 memory across four 4 GB modules. The 204-pin SODIMM form factor fits compatible laptops, all-in-one PCs, small-form-factor desktops and NAS devices. Modules run at 1333 MHz with CL9 latency and operate at 1.50 V. The kit is unbuffered, non-ECC and has no heat spreader.
Four modules are packaged together so they can populate up to four slots without mixing different production batches. The matched set helps avoid timing mismatches that can cause instability when populating multiple slots. No additional software or drivers are included; installation is a physical memory swap following the system manual.
This kit is aimed at users whose hardware accepts four 204-pin DDR3 modules at 1333 MHz and 1.50 V. Buyers whose devices have fewer than four slots, require ECC or registered memory, need a different voltage such as 1.35 V, or use a newer DDR generation should look at other options.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS10600-428LK4 |
| Capacity | 16GB (4 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The kit is rated at 1.50V; if your system only supports 1.35V operation the modules may not be compatible.
The JEDEC PC3-10600 rating caps sustained throughput at 1333 MHz with CL9 latency.
Without a heat spreader the 4 GB modules rely on case airflow; typical DDR3 SODIMMs stay warm but within JEDEC thermal limits.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?