Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green bare circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 1.2V 288-Pin UDIMM Desktop RAM

SKU CH-T8E0-4AFR8

16 GB DDR4 desktop module running at 2666 MHz with CL19 latency and 1.2 V operation

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity boosts multitasking headroom
  • DDR4 2666 speed feeds data faster
  • CL19 latency keeps response tight
  • 20 V operation cuts power draw
  • 288-pin UDIMM fits standard desktop slots

16GB DDR4 2666 UDIMM

This 16GB DDR4 2666 UDIMM module provides a straightforward desktop memory upgrade. It operates at 1.2V with CL19 latency and uses a standard 288-pin unbuffered non-ECC design. The single-rank 2Rx8 configuration relies on major OEM chips from Samsung, Micron or Hynix. No heat spreader or LED lighting is included.

Non-ECC desktop builders versus ECC server needs

The module suits standard desktop motherboards that accept non-ECC unbuffered DDR4 memory. It is not intended for platforms requiring ECC, registered or load-reduced DIMMs. Workstations and NAS devices needing error correction should look at ECC-qualified parts instead. Compatibility depends on the motherboard supporting DDR4 2666 at 1.2V.

CL19 latency at 2666 MT/s

The CAS latency of CL19 at 2666 MT/s is the key timing figure that determines fit for a given system. Builders should verify that their board can run this speed and latency combination without manual adjustment. If the platform demands tighter timings or a different voltage, another module will be required.

Punti di forza

  • 16 GB capacity boosts multitasking headroom
  • DDR4 2666 speed feeds data faster
  • CL19 latency keeps response tight
  • 20 V operation cuts power draw
  • 288-pin UDIMM fits standard desktop slots

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD21300-628K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Domande su questo articolo

What motherboard slot and voltage does this 288-pin 1.20 V DDR4 module require?

The module fits a standard 288-pin DDR4 UDIMM slot and runs at 1.20 V, so the board must support DDR4 at that voltage.

Can I add this CL19 2666 MHz stick to a system that already has slower DDR4 modules installed?

The stick will run at the speed and timings of the slowest module present; mixing is possible but the faster module will down-clock to match.

How can I verify the module is recognised at 2666 MHz CL19 after installation?

Check the BIOS memory information or a tool such as CPU-Z; it should report 16 GB, DDR4-2666, CAS latency 19 and 1.20 V operation.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.