BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278589BTC
現貨
NEMIX RAM
NEMIX RAM 16GB DDR4 2666 CL19 1.2V 288-Pin UDIMM Desktop RAM
16 GB DDR4 desktop module running at 2666 MHz with CL19 latency and 1.2 V operation
- Capacity16GB
- Type288-Pin DDR4 UDIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- 16 GB capacity boosts multitasking headroom
- DDR4 2666 speed feeds data faster
- CL19 latency keeps response tight
- 20 V operation cuts power draw
- 288-pin UDIMM fits standard desktop slots
16GB DDR4 2666 UDIMM
This 16GB DDR4 2666 UDIMM module provides a straightforward desktop memory upgrade. It operates at 1.2V with CL19 latency and uses a standard 288-pin unbuffered non-ECC design. The single-rank 2Rx8 configuration relies on major OEM chips from Samsung, Micron or Hynix. No heat spreader or LED lighting is included.
Non-ECC desktop builders versus ECC server needs
The module suits standard desktop motherboards that accept non-ECC unbuffered DDR4 memory. It is not intended for platforms requiring ECC, registered or load-reduced DIMMs. Workstations and NAS devices needing error correction should look at ECC-qualified parts instead. Compatibility depends on the motherboard supporting DDR4 2666 at 1.2V.
CL19 latency at 2666 MT/s
The CAS latency of CL19 at 2666 MT/s is the key timing figure that determines fit for a given system. Builders should verify that their board can run this speed and latency combination without manual adjustment. If the platform demands tighter timings or a different voltage, another module will be required.
商品特色
- 16 GB capacity boosts multitasking headroom
- DDR4 2666 speed feeds data faster
- CL19 latency keeps response tight
- 20 V operation cuts power draw
- 288-pin UDIMM fits standard desktop slots
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD21300-628K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
商品問答
What motherboard slot and voltage does this 288-pin 1.20 V DDR4 module require?
The module fits a standard 288-pin DDR4 UDIMM slot and runs at 1.20 V, so the board must support DDR4 at that voltage.
Can I add this CL19 2666 MHz stick to a system that already has slower DDR4 modules installed?
The stick will run at the speed and timings of the slowest module present; mixing is possible but the faster module will down-clock to match.
How can I verify the module is recognised at 2666 MHz CL19 after installation?
Check the BIOS memory information or a tool such as CPU-Z; it should report 16 GB, DDR4-2666, CAS latency 19 and 1.20 V operation.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
