Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR5 RDIMM sticks, black chips, no heat spreader, 288 pins

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 ECC RDIMM X14SDI-36C-SP3F memory upgrade

SKU CH-CY30-4N2EH

192GB DDR5 5600 ECC registered server memory kit with two 96GB modules, CL46 latency, 1.1V operation, and 288-pin RDIMM form factor, validated for the Supermicro X14SDI-36C-SP3F motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

  • 192 GB total capacity in a matched 2 x 96 GB kit
  • DDR5 5600 MT/s speed rated at PC5-44800 for full bus throughput
  • Registered ECC RDIMM design corrects single-bit errors and offloads the memory controller
  • CL46 latency at 1.1 V delivers spec-compliant timing and power draw
  • Verified fitment for Supermicro X14SDI-36C-SP3F motherboard with 288-pin RDIMM slots

Exact-fit server memory kit

This 192GB kit delivers two 96GB DDR5 5600 RDIMM modules built to the Supermicro X14SDI-36C-SP3F motherboard's exact specifications. Registered ECC operation with CL46 timing at 1.1V ensures the memory controller recognises full capacity and runs at rated speed without manual tuning. The 2Rx4 organisation matches the board's population rules for stable, fully populated operation.

Replaces mismatched or undersized DIMMs

Upgrading from smaller-capacity or mixed-rank modules removes the risk of downclocking, reduced channel count or boot failures caused by population conflicts. The jump is worth it when your workloads need the full 192GB at the native 5600 MT/s data rate and ECC protection across every slot. Builders using UDIMM or SODIMM form factors cannot use this registered kit.

Limited to DDR5 288-pin RDIMM slots

The DDR5 interface provides 5600 MT/s bandwidth only on motherboards wired for registered DIMMs with matching voltage and timing support. Unbuffered or consumer boards will not accept the 288-pin registered form factor. Maximum capacity per slot and total system memory remain bound by the platform's memory-controller design and qualified-vendor list.

Punti di forza

  • 192 GB total capacity in a matched 2 x 96 GB kit
  • DDR5 5600 MT/s speed rated at PC5-44800 for full bus throughput
  • Registered ECC RDIMM design corrects single-bit errors and offloads the memory controller
  • CL46 latency at 1.1 V delivers spec-compliant timing and power draw
  • Verified fitment for Supermicro X14SDI-36C-SP3F motherboard with 288-pin RDIMM slots

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Does the 288-pin DDR5 RDIMM form factor match the Supermicro X14SDI-36C-SP3F motherboard slots?

Yes, the kit uses 288-pin DDR5 RDIMM modules which are the exact form factor required by the Supermicro X14SDI-36C-SP3F motherboard.

What population order should I follow when installing the two 96GB modules on this motherboard?

Consult the Supermicro X14SDI-36C-SP3F manual for the approved DIMM population order; installing in the wrong slots can prevent the system from recognising the full 192GB capacity.

Will the registered ECC design reduce the need for memory-related maintenance over time?

The registered architecture offloads the memory controller and ECC corrects single-bit errors on the fly, reducing silent data corruption and unplanned reboots during long-term operation.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.