我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 RDIMM sticks, black chips, no heat spreader, 288 pins

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 ECC RDIMM X14SDI-36C-SP3F memory upgrade

SKU CH-CY30-4N2EH

192GB DDR5 5600 ECC registered server memory kit with two 96GB modules, CL46 latency, 1.1V operation, and 288-pin RDIMM form factor, validated for the Supermicro X14SDI-36C-SP3F motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

  • 192 GB total capacity in a matched 2 x 96 GB kit
  • DDR5 5600 MT/s speed rated at PC5-44800 for full bus throughput
  • Registered ECC RDIMM design corrects single-bit errors and offloads the memory controller
  • CL46 latency at 1.1 V delivers spec-compliant timing and power draw
  • Verified fitment for Supermicro X14SDI-36C-SP3F motherboard with 288-pin RDIMM slots

Exact-fit server memory kit

This 192GB kit delivers two 96GB DDR5 5600 RDIMM modules built to the Supermicro X14SDI-36C-SP3F motherboard's exact specifications. Registered ECC operation with CL46 timing at 1.1V ensures the memory controller recognises full capacity and runs at rated speed without manual tuning. The 2Rx4 organisation matches the board's population rules for stable, fully populated operation.

Replaces mismatched or undersized DIMMs

Upgrading from smaller-capacity or mixed-rank modules removes the risk of downclocking, reduced channel count or boot failures caused by population conflicts. The jump is worth it when your workloads need the full 192GB at the native 5600 MT/s data rate and ECC protection across every slot. Builders using UDIMM or SODIMM form factors cannot use this registered kit.

Limited to DDR5 288-pin RDIMM slots

The DDR5 interface provides 5600 MT/s bandwidth only on motherboards wired for registered DIMMs with matching voltage and timing support. Unbuffered or consumer boards will not accept the 288-pin registered form factor. Maximum capacity per slot and total system memory remain bound by the platform's memory-controller design and qualified-vendor list.

商品特色

  • 192 GB total capacity in a matched 2 x 96 GB kit
  • DDR5 5600 MT/s speed rated at PC5-44800 for full bus throughput
  • Registered ECC RDIMM design corrects single-bit errors and offloads the memory controller
  • CL46 latency at 1.1 V delivers spec-compliant timing and power draw
  • Verified fitment for Supermicro X14SDI-36C-SP3F motherboard with 288-pin RDIMM slots

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the 288-pin DDR5 RDIMM form factor match the Supermicro X14SDI-36C-SP3F motherboard slots?

Yes, the kit uses 288-pin DDR5 RDIMM modules which are the exact form factor required by the Supermicro X14SDI-36C-SP3F motherboard.

What population order should I follow when installing the two 96GB modules on this motherboard?

Consult the Supermicro X14SDI-36C-SP3F manual for the approved DIMM population order; installing in the wrong slots can prevent the system from recognising the full 192GB capacity.

Will the registered ECC design reduce the need for memory-related maintenance over time?

The registered architecture offloads the memory controller and ECC corrects single-bit errors on the fly, reducing silent data corruption and unplanned reboots during long-term operation.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。