Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Four green DDR4 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 32GB 4x8GB DDR4 2933 CL21 1.2V 288-Pin UDIMM memory upgrade

SKU CH-RZDX-KCP6Y

Four unbuffered DDR4 UDIMMs add 32 GB at 2933 MHz CL21 for compatible Supermicro workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit expands system memory for demanding workloads
  • DDR4 2933 MT/s transfers data quickly across the bus
  • CL21 latency keeps response times tight under load
  • 2 V operation reduces power draw and heat output
  • 4 × 8 GB unbuffered UDIMMs install in standard 288-pin slots

32 GB DDR4 kit for Supermicro workstations

This 32 GB kit contains four 8 GB DDR4 2933 UDIMM modules built for Supermicro desktop and SuperWorkstation systems. It targets administrators and builders who need a matched set for multi-channel operation on supported platforms.

Unbuffered non-ECC modules without heat spreaders

Each 288-pin DIMM uses major-brand Samsung, Micron or Hynix chips in a 1Rx8 layout and runs at 1.20 V. The absence of a spreader keeps the profile low for dense chassis, while the unbuffered non-ECC design suits standard workstation boards.

DDR4 2933 CL21 limits bandwidth to PC4-23400

The JEDEC-standard 2933 MT/s rate and CL21 latency cap peak throughput at PC4-23400, so workloads that scale with higher memory clocks will not reach their full potential on this kit. Builders needing faster DDR4 speeds or ECC protection must select a different specification.

Punti di forza

  • 32 GB kit expands system memory for demanding workloads
  • DDR4 2933 MT/s transfers data quickly across the bus
  • CL21 latency keeps response times tight under load
  • 2 V operation reduces power draw and heat output
  • 4 × 8 GB unbuffered UDIMMs install in standard 288-pin slots

Caratteristiche tecniche

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K4
Capacity32GB (4 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (4X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Domande su questo articolo

Does the DDR4 2933 interface cap real-world throughput at PC4-23400?

Yes, the kit is rated DDR4 2933 (PC4-23400), so peak bandwidth is limited to that transfer rate.

Will the 288-pin UDIMM modules fit a standard desktop DIMM slot?

They are 288-pin DDR4 UDIMMs, which match the physical keying and length of ordinary desktop memory slots.

How do I install the 1Rx8 sticks, and which step do people miss?

Power down, open the case, align the notch on each 1Rx8 module with the slot key, press firmly until both retention clips click, then verify all four modules are recognised in BIOS.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.