Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Four green DDR5 UDIMM modules without heat spreaders in a kit box

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR5 5600MHz CL46 1.1V 288-Pin UDIMM Supermicro X13SAE memory upgrade

SKU CH-BWFT-Y7CV5

A 32 GB DDR5 kit of four 8 GB UDIMMs running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro X13SAE motherboard

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 4X8GB

  • 32 GB capacity across four 8 GB modules for expanded multitasking headroom
  • DDR5 5600 MT/s speed transfers data at PC5-44800 bandwidth
  • CL46 CAS latency at 1.10 V delivers rated timing without voltage overhead
  • 288-pin UDIMM form factor matches the Supermicro X13SAE memory slots exactly
  • Built with major OEM Samsung, Micron or Hynix chips and tested for stability

System-specific DDR5 kit

This 32 GB (4 × 8 GB) DDR5 5600 kit is built for the Supermicro X13SAE motherboard. The modules are 288-pin UDIMMs that run at 1.1 V with CL46 timing and 1Rx8 rank layout.

Fits X13SAE non-ECC slots only

Builders needing ECC, registered DIMMs or SODIMM form factors cannot use this kit. It also suits only systems that accept four single-rank unbuffered modules at the rated voltage.

288-pin UDIMM form factor

The physical 288-pin DDR5 UDIMM design determines whether the memory installs in your board. Verify the motherboard manual calls for unbuffered non-ECC UDIMMs before ordering.

Punti di forza

  • 32 GB capacity across four 8 GB modules for expanded multitasking headroom
  • DDR5 5600 MT/s speed transfers data at PC5-44800 bandwidth
  • CL46 CAS latency at 1.10 V delivers rated timing without voltage overhead
  • 288-pin UDIMM form factor matches the Supermicro X13SAE memory slots exactly
  • Built with major OEM Samsung, Micron or Hynix chips and tested for stability

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Does the 288-pin UDIMM fit the Supermicro X13SAE motherboard slots?

Yes, the 288-pin DDR5 UDIMM form factor matches the Supermicro X13SAE memory slots exactly, so the modules seat correctly without adapters.

What is the correct order to populate the four 8GB modules on the X13SAE?

Consult the motherboard manual for the approved DIMM population sequence; installing the 1Rx8 modules in the wrong slots can prevent the system from recognising the full 32GB capacity.

Will the Samsung, Micron or Hynix chips on these modules need replacement over time?

The major OEM DRAM chips are rated for the lifetime of the kit and do not require scheduled replacement; the product carries a lifetime replacement warranty for added assurance.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.