Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Four green DDR5 UDIMM modules without heat spreaders in a kit box

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR5 5600MHz CL46 1.1V 288-Pin UDIMM Supermicro X13SAE memory upgrade

SKU CH-BWFT-Y7CV5

A 32 GB DDR5 kit of four 8 GB UDIMMs running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro X13SAE motherboard

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 4X8GB

  • 32 GB capacity across four 8 GB modules for expanded multitasking headroom
  • DDR5 5600 MT/s speed transfers data at PC5-44800 bandwidth
  • CL46 CAS latency at 1.10 V delivers rated timing without voltage overhead
  • 288-pin UDIMM form factor matches the Supermicro X13SAE memory slots exactly
  • Built with major OEM Samsung, Micron or Hynix chips and tested for stability

System-specific DDR5 kit

This 32 GB (4 × 8 GB) DDR5 5600 kit is built for the Supermicro X13SAE motherboard. The modules are 288-pin UDIMMs that run at 1.1 V with CL46 timing and 1Rx8 rank layout.

Fits X13SAE non-ECC slots only

Builders needing ECC, registered DIMMs or SODIMM form factors cannot use this kit. It also suits only systems that accept four single-rank unbuffered modules at the rated voltage.

288-pin UDIMM form factor

The physical 288-pin DDR5 UDIMM design determines whether the memory installs in your board. Verify the motherboard manual calls for unbuffered non-ECC UDIMMs before ordering.

Pontos fortes

  • 32 GB capacity across four 8 GB modules for expanded multitasking headroom
  • DDR5 5600 MT/s speed transfers data at PC5-44800 bandwidth
  • CL46 CAS latency at 1.10 V delivers rated timing without voltage overhead
  • 288-pin UDIMM form factor matches the Supermicro X13SAE memory slots exactly
  • Built with major OEM Samsung, Micron or Hynix chips and tested for stability

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Does the 288-pin UDIMM fit the Supermicro X13SAE motherboard slots?

Yes, the 288-pin DDR5 UDIMM form factor matches the Supermicro X13SAE memory slots exactly, so the modules seat correctly without adapters.

What is the correct order to populate the four 8GB modules on the X13SAE?

Consult the motherboard manual for the approved DIMM population sequence; installing the 1Rx8 modules in the wrong slots can prevent the system from recognising the full 32GB capacity.

Will the Samsung, Micron or Hynix chips on these modules need replacement over time?

The major OEM DRAM chips are rated for the lifetime of the kit and do not require scheduled replacement; the product carries a lifetime replacement warranty for added assurance.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.