Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green 204-pin DDR3 SODIMM module, no heat spreader, 4GB label visible

NEMIX RAM

NEMIX RAM 4GB DDR3 1866 PC3-14900 1Rx8 1.35V 204-Pin SODIMM Synology Memory Upgrade

SKU CH-26YD-1NW4Y

4GB DDR3 SODIMM runs at 1866MHz with 1.35V low voltage for Synology NAS upgrades

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • Boosts NAS responsiveness with 1866 MHz DDR3 speed
  • Low 1.35 V voltage reduces power draw and heat
  • 1Rx8 single-rank layout simplifies memory controller load
  • CL13 CAS latency supports snappy random access
  • Built with major OEM chips for proven reliability

NEMIX RAM 4GB DDR3 1866 SODIMM

This 4GB DDR3 SODIMM module runs at 1866MHz with CL13 latency and 1.35V operation. It uses a 204-pin form factor and 1Rx8 rank configuration. The non-ECC unbuffered design targets Synology NAS systems requiring PC3-14900 memory.

Synology NAS owners adding memory

The module fits Synology devices that accept DDR3 1866 SODIMM RAM. Buyers needing ECC error correction or registered modules should look elsewhere. Systems requiring higher capacity per slot or different voltage specifications will not be compatible.

PC3-14900 speed rating decides fit

The 1866MHz DDR3 speed grade determines whether this module matches the system memory bus. Verify the NAS motherboard supports PC3-14900 before purchase. Incorrect speed selection prevents boot or forces downclocking.

Punti di forza

  • Boosts NAS responsiveness with 1866 MHz DDR3 speed
  • Low 1.35 V voltage reduces power draw and heat
  • 1Rx8 single-rank layout simplifies memory controller load
  • CL13 CAS latency supports snappy random access
  • Built with major OEM chips for proven reliability

Caratteristiche tecniche

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR3 1866MHZ Non-ECC Unbuffered SODIMM
Part NumberMS14900-418K1
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemSynology
CAS LatencyCL13
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank1Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1866MHZ PC3-14900 1Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Domande su questo articolo

Will this 204-pin DDR3 SODIMM fit my Synology NAS that currently uses a single memory slot?

Yes, the module is a 204-pin DDR3 SODIMM designed for Synology systems that accept this form factor and voltage.

Can I install this 1.35 V DDR3 1866 module alongside an existing 1.5 V DDR3 stick in the same NAS?

The stick operates at 1.35 V; mixing voltages is not recommended because the system will default to the higher voltage.

How can I confirm the NAS recognises the full 4 GB at DDR3 1866 CL13 after installation?

Check the DSM Resource Monitor or memory information page; it should show 4 GB running at 1866 MHz with CL13 timings.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.