暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 204-pin DDR3 SODIMM module, no heat spreader, 4GB label visible

NEMIX RAM

NEMIX RAM 4GB DDR3 1866 PC3-14900 1Rx8 1.35V 204-Pin SODIMM Synology Memory Upgrade

SKU CH-26YD-1NW4Y

4GB DDR3 SODIMM runs at 1866MHz with 1.35V low voltage for Synology NAS upgrades

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • Boosts NAS responsiveness with 1866 MHz DDR3 speed
  • Low 1.35 V voltage reduces power draw and heat
  • 1Rx8 single-rank layout simplifies memory controller load
  • CL13 CAS latency supports snappy random access
  • Built with major OEM chips for proven reliability

NEMIX RAM 4GB DDR3 1866 SODIMM

This 4GB DDR3 SODIMM module runs at 1866MHz with CL13 latency and 1.35V operation. It uses a 204-pin form factor and 1Rx8 rank configuration. The non-ECC unbuffered design targets Synology NAS systems requiring PC3-14900 memory.

Synology NAS owners adding memory

The module fits Synology devices that accept DDR3 1866 SODIMM RAM. Buyers needing ECC error correction or registered modules should look elsewhere. Systems requiring higher capacity per slot or different voltage specifications will not be compatible.

PC3-14900 speed rating decides fit

The 1866MHz DDR3 speed grade determines whether this module matches the system memory bus. Verify the NAS motherboard supports PC3-14900 before purchase. Incorrect speed selection prevents boot or forces downclocking.

特長

  • Boosts NAS responsiveness with 1866 MHz DDR3 speed
  • Low 1.35 V voltage reduces power draw and heat
  • 1Rx8 single-rank layout simplifies memory controller load
  • CL13 CAS latency supports snappy random access
  • Built with major OEM chips for proven reliability

仕様

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR3 1866MHZ Non-ECC Unbuffered SODIMM
Part NumberMS14900-418K1
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemSynology
CAS LatencyCL13
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank1Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1866MHZ PC3-14900 1Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Will this 204-pin DDR3 SODIMM fit my Synology NAS that currently uses a single memory slot?

Yes, the module is a 204-pin DDR3 SODIMM designed for Synology systems that accept this form factor and voltage.

Can I install this 1.35 V DDR3 1866 module alongside an existing 1.5 V DDR3 stick in the same NAS?

The stick operates at 1.35 V; mixing voltages is not recommended because the system will default to the higher voltage.

How can I confirm the NAS recognises the full 4 GB at DDR3 1866 CL13 after installation?

Check the DSM Resource Monitor or memory information page; it should show 4 GB running at 1866 MHz with CL13 timings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。