Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR5 UDIMM sticks, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V 288-pin UDIMM Dell Pro Max Micro memory upgrade

SKU CH-AGWP-TJAGH

64 GB dual-channel DDR5 kit (2 × 32 GB) at 5600 MT/s CL46, 1.1 V unbuffered UDIMM built for the Dell Pro Max Micro desktop

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity with two 32 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • Low 1.1 V operating voltage for efficient power use
  • CL46 latency timing for responsive data access
  • 288-pin UDIMM form factor built for Dell Pro Max Micro

Dell Pro Max Micro upgrade

This 64GB kit delivers two 32GB DDR5 modules rated at 5600 MT/s with CL46 latency. Each stick runs at 1.1V on a 288-pin UDIMM form factor and uses a 2Rx8 organisation without ECC or a heat spreader. The memory is validated for the Dell Pro Max Micro desktop.

Suits Dell Pro Max Micro owners

Buyers who need a matched pair of 32GB DDR5 modules for that specific system will find the correct speed, voltage and pin-out here. Builders targeting a different motherboard, a laptop SO-DIMM slot, or a platform that requires registered or ECC memory should look elsewhere.

Fits two UDIMM slots on the Dell board

The kit occupies both DIMM sockets on the Pro Max Micro, providing the full 64GB capacity in a dual-channel configuration. No additional cooling hardware is required because the modules ship without spreaders, and the 1.1V operation keeps power draw within the platform’s standard memory budget.

Punti di forza

  • 64 GB total capacity with two 32 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • Low 1.1 V operating voltage for efficient power use
  • CL46 latency timing for responsive data access
  • 288-pin UDIMM form factor built for Dell Pro Max Micro

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Domande su questo articolo

Does my Dell Pro Max Micro desktop have the two DDR5 UDIMM slots this 64 GB kit requires?

The kit is built for the Dell Pro Max Micro desktop and uses 288-pin DDR5 UDIMM modules; verify the system has two free DDR5 slots before installing.

If I leave the original memory installed, will the system still run at DDR5 5600 CL46?

Mixing modules forces the memory controller to run all sticks at the lowest common speed and latency; for full 5600 MT/s CL46 performance, replace the original memory with this 2x32 GB kit.

How can I confirm the kit is operating at DDR5 5600 CL46 after installation?

Check the memory speed and CAS latency in BIOS or a tool such as CPU-Z; both should report 5600 MT/s and CL46 when the kit is running as intended.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.