BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.0027834BTC
En stock
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V 288-pin UDIMM Dell Pro Max Micro memory upgrade
64 GB dual-channel DDR5 kit (2 × 32 GB) at 5600 MT/s CL46, 1.1 V unbuffered UDIMM built for the Dell Pro Max Micro desktop
- Capacity64GB (2 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity with two 32 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.1 V operating voltage for efficient power use
- CL46 latency timing for responsive data access
- 288-pin UDIMM form factor built for Dell Pro Max Micro
Dell Pro Max Micro upgrade
This 64GB kit delivers two 32GB DDR5 modules rated at 5600 MT/s with CL46 latency. Each stick runs at 1.1V on a 288-pin UDIMM form factor and uses a 2Rx8 organisation without ECC or a heat spreader. The memory is validated for the Dell Pro Max Micro desktop.
Suits Dell Pro Max Micro owners
Buyers who need a matched pair of 32GB DDR5 modules for that specific system will find the correct speed, voltage and pin-out here. Builders targeting a different motherboard, a laptop SO-DIMM slot, or a platform that requires registered or ECC memory should look elsewhere.
Fits two UDIMM slots on the Dell board
The kit occupies both DIMM sockets on the Pro Max Micro, providing the full 64GB capacity in a dual-channel configuration. No additional cooling hardware is required because the modules ship without spreaders, and the 1.1V operation keeps power draw within the platform’s standard memory budget.
Puntos fuertes
- 64 GB total capacity with two 32 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.1 V operating voltage for efficient power use
- CL46 latency timing for responsive data access
- 288-pin UDIMM form factor built for Dell Pro Max Micro
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Preguntas sobre este artículo
Does my Dell Pro Max Micro desktop have the two DDR5 UDIMM slots this 64 GB kit requires?
The kit is built for the Dell Pro Max Micro desktop and uses 288-pin DDR5 UDIMM modules; verify the system has two free DDR5 slots before installing.
If I leave the original memory installed, will the system still run at DDR5 5600 CL46?
Mixing modules forces the memory controller to run all sticks at the lowest common speed and latency; for full 5600 MT/s CL46 performance, replace the original memory with this 2x32 GB kit.
How can I confirm the kit is operating at DDR5 5600 CL46 after installation?
Check the memory speed and CAS latency in BIOS or a tool such as CPU-Z; both should report 5600 MT/s and CL46 when the kit is running as intended.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
