Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Four green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600 CL46 1.1V ECC RDIMM GIGABYTE MS34-CP0 memory upgrade

SKU CH-59GV-RVKN3

64 GB kit of four 16 GB DDR5 5600 CL46 1.1 V ECC registered RDIMM modules validated for the Gigabyte MS34-CP0 motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Mostra altre 18 configurazioni
  • 64 GB total capacity from four 16 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
  • 1 V registered ECC RDIMM reduces controller load and corrects single-bit errors
  • 288-pin RDIMM form factor matches the GIGABYTE MS34-CP0 motherboard slot exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Exact-match DDR5-5600 kit for GIGABYTE MS34-CP0

This 64 GB kit contains four 16 GB DDR5-5600 RDIMMs built to the exact rank, voltage and timing the GIGABYTE MS34-CP0 memory controller expects. Registered ECC architecture with CL46 latency and 1.1 V operation lets the board recognise full capacity at rated speed without manual tuning. It is not for systems that require unbuffered UDIMMs or non-ECC modules.

Replaces mismatched or partial populations

Swapping a mixed-speed or incomplete DIMM set for this spec-matched 4 x 16 GB kit removes the population-rule conflicts that force servers to down-clock or disable slots. The jump is worth it when the current configuration cannot reach 64 GB at DDR5-5600 because of rank or voltage mismatches. It does not address platforms limited to lower densities or different form factors.

Steady throughput under full-slot load

Registered buffering offloads the memory controller so all four slots sustain DDR5-5600 bandwidth continuously, while on-die ECC corrects single-bit errors before they corrupt data or trigger reboots. The 1.1 V supply keeps power draw predictable during extended compute runs. Modules without heat spreaders rely on chassis airflow, so sustained load stability depends on adequate case cooling.

Punti di forza

  • 64 GB total capacity from four 16 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
  • 1 V registered ECC RDIMM reduces controller load and corrects single-bit errors
  • 288-pin RDIMM form factor matches the GIGABYTE MS34-CP0 motherboard slot exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Will these 288-pin RDIMMs fit the GIGABYTE MS34-CP0 motherboard DIMM slots?

Yes, the kit is built to the exact 288-pin DDR5 RDIMM form factor the MS34-CP0 requires, so each module seats directly in the board's DDR5 slots without adapters.

What is the correct order to populate the four 1Rx8 modules on the MS34-CP0, and which step do installers often miss?

Install all four 16 GB modules following the motherboard manual's population sequence — usually slot 1, 2, 3, 4 — and the step most often missed is enabling ECC in the BIOS after the hardware is seated.

When should the ECC RDIMM kit be replaced or checked for errors in a production server?

Run a full memory diagnostic at deployment and after any unexplained crash; replace a module if the ECC logger reports recurring correctable errors or any uncorrectable error, otherwise the kit is rated for continuous operation.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.