We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600 CL46 1.1V ECC RDIMM GIGABYTE MS34-CP0 memory upgrade

SKU CH-59GV-RVKN3

64 GB kit of four 16 GB DDR5 5600 CL46 1.1 V ECC registered RDIMM modules validated for the Gigabyte MS34-CP0 motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Show 18 more configurations
  • 64 GB total capacity from four 16 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
  • 1 V registered ECC RDIMM reduces controller load and corrects single-bit errors
  • 288-pin RDIMM form factor matches the GIGABYTE MS34-CP0 motherboard slot exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Exact-match DDR5-5600 kit for GIGABYTE MS34-CP0

This 64 GB kit contains four 16 GB DDR5-5600 RDIMMs built to the exact rank, voltage and timing the GIGABYTE MS34-CP0 memory controller expects. Registered ECC architecture with CL46 latency and 1.1 V operation lets the board recognise full capacity at rated speed without manual tuning. It is not for systems that require unbuffered UDIMMs or non-ECC modules.

Replaces mismatched or partial populations

Swapping a mixed-speed or incomplete DIMM set for this spec-matched 4 x 16 GB kit removes the population-rule conflicts that force servers to down-clock or disable slots. The jump is worth it when the current configuration cannot reach 64 GB at DDR5-5600 because of rank or voltage mismatches. It does not address platforms limited to lower densities or different form factors.

Steady throughput under full-slot load

Registered buffering offloads the memory controller so all four slots sustain DDR5-5600 bandwidth continuously, while on-die ECC corrects single-bit errors before they corrupt data or trigger reboots. The 1.1 V supply keeps power draw predictable during extended compute runs. Modules without heat spreaders rely on chassis airflow, so sustained load stability depends on adequate case cooling.

Highlights

  • 64 GB total capacity from four 16 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
  • 1 V registered ECC RDIMM reduces controller load and corrects single-bit errors
  • 288-pin RDIMM form factor matches the GIGABYTE MS34-CP0 motherboard slot exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will these 288-pin RDIMMs fit the GIGABYTE MS34-CP0 motherboard DIMM slots?

Yes, the kit is built to the exact 288-pin DDR5 RDIMM form factor the MS34-CP0 requires, so each module seats directly in the board's DDR5 slots without adapters.

What is the correct order to populate the four 1Rx8 modules on the MS34-CP0, and which step do installers often miss?

Install all four 16 GB modules following the motherboard manual's population sequence — usually slot 1, 2, 3, 4 — and the step most often missed is enabling ECC in the BIOS after the hardware is seated.

When should the ECC RDIMM kit be replaced or checked for errors in a production server?

Run a full memory diagnostic at deployment and after any unexplained crash; replace a module if the ECC logger reports recurring correctable errors or any uncorrectable error, otherwise the kit is rated for continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.