We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 192GB 4x48GB 4800MHz CL40 1.1V Supermicro H13SRH

SKU CH-CCT3-JVWSW

192 GB DDR5 ECC registered server memory kit of four 48 GB modules at 4800 MHz CL40 1.1 V, validated for Supermicro H13SRH motherboards

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

Show 18 more configurations

Speed 4800MHz

  • 192 GB total capacity from four 48 GB modules
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches server memory-controller requirements
  • 288-pin RDIMM form factor verified for Supermicro H13SRH

Exact-match DDR5 ECC RDIMM kit for Supermicro H13SRH

This 192GB kit contains four 48GB DDR5 4800 modules built to the 2Rx8 Registered ECC specification at 1.1V CL40. It is intended for administrators who need the precise rank, voltage and timing that the H13SRH memory controller expects so the server recognises full capacity at rated speed.

Registered ECC architecture for fully populated

Registered buffering offloads the memory controller allowing every slot to run fully populated at full capacity while ECC catches and corrects single-bit errors on the fly. This combination stops silent data corruption and unplanned reboots before they reach production workloads.

Verify DIMM population rules in your manual

Server and motherboard memory support varies by model so consult your system or motherboard manual for supported capacities approved DIMM population order and installation steps before purchase. This kit uses the 288-pin RDIMM form factor required by the board not UDIMM or SODIMM.

Highlights

  • 192 GB total capacity from four 48 GB modules
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches server memory-controller requirements
  • 288-pin RDIMM form factor verified for Supermicro H13SRH

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 48GB RDIMMs need any firmware updates or periodic reseating to stay stable in the Supermicro H13SRH?

The modules are an exact-match DDR5-4800 kit validated for that motherboard; no firmware updates or reseating schedule are required once they are seated correctly.

What limit appears first when the 192GB kit runs at full DDR5-4800 CL40 1.1V load for hours?

The memory controller on the H13SRH reaches its maximum supported bandwidth before the RDIMMs hit any thermal or voltage ceiling.

How much heat does the 4x48GB kit produce at 1.1V during continuous operation?

Registered DDR5 at 1.1V draws modest power per module, so the kit adds only a small amount of heat to the server's existing airflow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.