We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders in a matched kit

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5 5600 ECC RDIMM Supermicro H13SRH memory upgrade

SKU CH-JZ31-SMVYJ

A 192GB DDR5 5600 ECC RDIMM kit built for the Supermicro H13SRH motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

Show 18 more configurations

Speed 5600MHz

  • 192GB total capacity from four 48GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • ECC and registered design prevents data corruption
  • 10V operation matches server memory controller spec
  • Verified fitment for Supermicro H13SRH motherboard

Exact-match DDR5 kit for Supermicro H13SRH

This 192GB kit contains four 48GB DDR5 5600 registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SRH memory controller expects. It is intended for administrators who need the full capacity recognised at rated speed without manual tuning.

Upgrade from smaller or slower DIMMs

The jump is worth it when your current configuration cannot hold the working set or runs at a lower data rate, because registered architecture offloads the controller and ECC corrects single-bit errors on the fly. It is not for systems that require unbuffered UDIMMs, SODIMMs, or a different DDR generation.

Straightforward 288-pin RDIMM installation

Modules seat in the standard 288-pin slots following the motherboard's population order; the kit ships as a matched set so no mixing occurs. What usually goes wrong is ignoring the manual's slot sequence or exceeding the board's validated capacity per channel.

Highlights

  • 192GB total capacity from four 48GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • ECC and registered design prevents data corruption
  • 10V operation matches server memory controller spec
  • Verified fitment for Supermicro H13SRH motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will these 288-pin DDR5 RDIMM modules fit the Supermicro H13SRH motherboard slots?

Yes, the kit uses the 288-pin Registered RDIMM form factor that the H13SRH requires, not UDIMM or SODIMM, and matches the board's DDR5 slot keying.

What is the correct population order when installing all four 48GB modules in the H13SRH?

Consult the Supermicro H13SRH manual for the approved DIMM population sequence; the board's memory-controller rules dictate which slots must be filled first for full 192GB recognition.

Do these registered ECC modules need any firmware updates or periodic reconfiguration after installation?

No firmware updates are required for the memory itself; the registered ECC design operates transparently once seated, and the modules have no heat spreaders or moving parts to service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.