We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 192GB (2x96GB) CL40 1.1V 288-pin memory upgrade for Supermicro H13SRH

SKU CH-DVWN-5PRDP

Registered ECC DDR5 kit delivers 192GB across two 96GB modules at 4800MHz CL40 for Supermicro H13SRH servers

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Show 18 more configurations

Speed 4800MHz

  • 192 GB total capacity from two 96 GB modules
  • DDR5 4800 speed with CL40 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches server memory-controller requirements
  • 288-pin RDIMM form factor fits Supermicro H13SRH motherboard

Targeted Server Upgrade

This 192GB kit contains two 96GB DDR5 RDIMMs built for the Supermicro H13SRH motherboard. It delivers registered ECC memory that the platform expects for stable operation in enterprise workloads.

Registered ECC Architecture

The modules use a 2Rx4 registered design with on-die ECC so the memory controller is buffered and single-bit errors are corrected automatically. This combination allows full-capacity population across every supported slot.

Low-Voltage Efficiency

Each DIMM runs at 1.1V without a heat spreader, keeping power draw modest while maintaining the rated 4800 MT/s speed and CL40 latency. The registered layout further reduces electrical load on the motherboard during sustained use.

Highlights

  • 192 GB total capacity from two 96 GB modules
  • DDR5 4800 speed with CL40 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches server memory-controller requirements
  • 288-pin RDIMM form factor fits Supermicro H13SRH motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does DDR5 4800 mean for actual throughput in a Supermicro H13SRH?

The DDR5 4800 rating gives a PC5 38400 peak transfer rate, so each 96 GB module can move up to that bandwidth when the board runs the memory at its rated speed.

How does the registered ECC RDIMM interface affect stability and slot population?

Registered buffering reduces electrical load on the memory controller, letting all slots run fully populated at 192 GB total, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Will the 288-pin RDIMM form factor fit the H13SRH DIMM slots without adapters?

Yes, the 288-pin RDIMM matches the H13SRH's DDR5 RDIMM slots exactly; no adapters or different module types are needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.