We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders, 288-pin, 64GB kit

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 6400 CL52 1.1V ECC Registered RDIMM memory upgrade for GIGABYTE MS34-CP0

SKU CH-JGSV-CRYEZ

64 GB kit of four 16 GB DDR5 RDIMMs running at 6400 MT/s with ECC and registered buffering for the GIGABYTE MS34-CP0 motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Show 18 more configurations
  • Exact-match 64 GB kit runs at rated DDR5-6400 speed
  • Registered ECC design prevents silent data corruption under load
  • 1Rx8 organisation and 1.10 V match motherboard memory-controller specs
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 board
  • Lifetime replacement warranty with free US-based technical support

Exact-match DDR5-6400 kit for GIGABYTE MS34-CP0

This 64 GB kit contains four 16 GB DDR5 6400 RDIMMs rated at CL52 and 1.1 V. Registered ECC with 1Rx8 organisation matches the memory controller expectations of the GIGABYTE MS34-CP0 motherboard so the full capacity is recognised and runs at its rated speed.

Replaces mismatched or partial DIMM sets

A mixed-capacity or unbuffered DIMM configuration can limit the board to lower speeds or reduced capacity. Populating all four channels with this spec-matched 1Rx8 RDIMM kit lets the server operate at DDR5-6400 with full ECC protection. It is not for systems that require UDIMMs, SODIMMs, or a different voltage.

Straightforward 288-pin RDIMM installation

Modules seat in the standard 288-pin DDR5 RDIMM slots; follow the motherboard manual for the approved population order. The most common issue is inserting DIMMs in the wrong sequence, which can prevent the system from posting or disable ECC functionality.

Highlights

  • Exact-match 64 GB kit runs at rated DDR5-6400 speed
  • Registered ECC design prevents silent data corruption under load
  • 1Rx8 organisation and 1.10 V match motherboard memory-controller specs
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 board
  • Lifetime replacement warranty with free US-based technical support

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 288-pin RDIMM modules fit the GIGABYTE MS34-CP0 motherboard slots?

Yes, the kit uses 288-pin DDR5 RDIMM form factor, which is the exact slot type the GIGABYTE MS34-CP0 motherboard requires for registered memory.

What is the correct installation order for the four 1Rx8 modules on this board?

Populate all four slots following the motherboard manual's DIMM population sequence; the 1Rx8 registered design allows full-capacity operation when every slot is filled.

Does the lack of a heat spreader affect long-term reliability?

The modules run at 1.1V CL52 without a heat spreader; ensure the server chassis provides adequate airflow over the DIMM area for sustained operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.