Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR5 RDIMM modules, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM 96GB (2×48GB) DDR5 5600 ECC RDIMM CL46 2Rx8 1.1V 288-Pin Supermicro H14DSG-OD memory upgrade

SKU CH-HV97-Z17DN

96 GB DDR5 5600 ECC registered RDIMM kit (2 × 48 GB, CL46, 1.1 V, 2Rx8) validated for Supermicro H14DSG-OD motherboards

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

Mostra altre 30 configurazioni
  • 96 GB total capacity from two 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the board's memory controller spec
  • Verified fit for Supermicro H14DSG-OD with 288-pin RDIMM form factor

96GB DDR5 5600 ECC RDIMM Kit

This NEMIX RAM kit provides 96GB of DDR5 memory across two 48GB registered DIMMs. It operates at 5600 MT/s with CL46 latency at 1.1V. The modules are built for the Supermicro H14DSG-OD motherboard using 288-pin RDIMM form factor with 2Rx8 organization.

Suited for H14DSG-OD memory expansion

This kit fits administrators upgrading a Supermicro H14DSG-OD server to its full 96GB capacity with validated, rank-matched modules. Registered ECC architecture ensures stability in fully populated channels. Buyers needing non-ECC UDIMMs, SODIMMs, or different voltages should select other parts.

Registered ECC with 2Rx8 organization

The Registered ECC design with 2Rx8 rank structure is the specific attribute that allows this memory to function correctly in the target motherboard. It offloads the memory controller and corrects single-bit errors, which is required for the H14DSG-OD's population rules.

Punti di forza

  • 96 GB total capacity from two 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the board's memory controller spec
  • Verified fit for Supermicro H14DSG-OD with 288-pin RDIMM form factor

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Will these 288-pin DDR5 RDIMMs fit the DIMM slots on my Supermicro H14DSG-OD motherboard?

Yes. The kit uses the 288-pin Registered RDIMM form factor that the H14DSG-OD requires. It is not a UDIMM or SODIMM, so it matches the board's physical slot keying and electrical specification.

What is the correct population order for the two 48 GB modules on the H14DSG-OD, and which step do builders often miss?

Consult the motherboard manual for the approved DIMM population sequence. The step most often missed is verifying the exact slot order before seating the modules, because the board's memory-controller topology requires a specific fill pattern to run at the rated 5600 MT/s.

Do these Samsung, Micron or Hynix IC modules need any firmware updates or periodic re-seating to maintain ECC integrity over time?

No firmware updates are required for the memory itself. The Registered ECC design corrects single-bit errors automatically. Keep the server's air filters clean and ensure stable 1.1 V delivery; re-seating is only needed if the chassis is moved or vibration loosens the retention clips.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.