我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 RDIMM modules, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM 96GB (2×48GB) DDR5 5600 ECC RDIMM CL46 2Rx8 1.1V 288-Pin Supermicro H14DSG-OD memory upgrade

SKU CH-HV97-Z17DN

96 GB DDR5 5600 ECC registered RDIMM kit (2 × 48 GB, CL46, 1.1 V, 2Rx8) validated for Supermicro H14DSG-OD motherboards

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

顯示另外 30 款選項
  • 96 GB total capacity from two 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the board's memory controller spec
  • Verified fit for Supermicro H14DSG-OD with 288-pin RDIMM form factor

96GB DDR5 5600 ECC RDIMM Kit

This NEMIX RAM kit provides 96GB of DDR5 memory across two 48GB registered DIMMs. It operates at 5600 MT/s with CL46 latency at 1.1V. The modules are built for the Supermicro H14DSG-OD motherboard using 288-pin RDIMM form factor with 2Rx8 organization.

Suited for H14DSG-OD memory expansion

This kit fits administrators upgrading a Supermicro H14DSG-OD server to its full 96GB capacity with validated, rank-matched modules. Registered ECC architecture ensures stability in fully populated channels. Buyers needing non-ECC UDIMMs, SODIMMs, or different voltages should select other parts.

Registered ECC with 2Rx8 organization

The Registered ECC design with 2Rx8 rank structure is the specific attribute that allows this memory to function correctly in the target motherboard. It offloads the memory controller and corrects single-bit errors, which is required for the H14DSG-OD's population rules.

商品特色

  • 96 GB total capacity from two 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the board's memory controller spec
  • Verified fit for Supermicro H14DSG-OD with 288-pin RDIMM form factor

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will these 288-pin DDR5 RDIMMs fit the DIMM slots on my Supermicro H14DSG-OD motherboard?

Yes. The kit uses the 288-pin Registered RDIMM form factor that the H14DSG-OD requires. It is not a UDIMM or SODIMM, so it matches the board's physical slot keying and electrical specification.

What is the correct population order for the two 48 GB modules on the H14DSG-OD, and which step do builders often miss?

Consult the motherboard manual for the approved DIMM population sequence. The step most often missed is verifying the exact slot order before seating the modules, because the board's memory-controller topology requires a specific fill pattern to run at the rated 5600 MT/s.

Do these Samsung, Micron or Hynix IC modules need any firmware updates or periodic re-seating to maintain ECC integrity over time?

No firmware updates are required for the memory itself. The Registered ECC design corrects single-bit errors automatically. Keep the server's air filters clean and ensure stable 1.1 V delivery; re-seating is only needed if the chassis is moved or vibration loosens the retention clips.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。