Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green circuit boards with gold contacts and black memory chips side by side

NEMIX RAM

NEMIX RAM 96GB 2x48GB DDR5 5600 CL46 1.1V 2Rx8 ECC RDIMM GIGABYTE MZ73-LM1 memory upgrade

SKU CH-045P-PWNJM

A 96 GB DDR5 registered ECC kit built for the Gigabyte MZ73-LM1 server motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

Mostra altre 24 configurazioni
  • 96 GB capacity with two 48 GB modules for full population
  • DDR5 5600 speed matches the motherboard's rated frequency
  • CL46 CAS latency and 1.1 V voltage meet the controller's timing spec
  • 2Rx8 registered ECC RDIMM architecture enables error correction and signal buffering
  • Verified fitment for the GIGABYTE MZ73-LM1 motherboard's 288-pin RDIMM slots

Exact-Match DDR5 ECC Kit for GIGABYTE MZ73-LM1

This 96GB kit contains two 48GB DDR5-5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the GIGABYTE MZ73-LM1 memory controller expects. The modules are recognized at full capacity and run at their rated speed without manual tuning. It is intended for server administrators who need guaranteed compatibility with this specific motherboard.

Registered Architecture

Registered buffering offloads the memory controller so every slot runs fully populated at full capacity while ECC corrects single-bit errors on the fly. The 288-pin RDIMM form factor is the only type this board accepts; UDIMM or SODIMM modules will not fit. No heat spreader is included, so airflow in the chassis must be sufficient for sustained operation.

CL46 Latency at 1.1V Defines the Correct Part

The single specification that decides fitment is CAS latency 46 at 1.1V combined with 2Rx8 Registered ECC DDR5-5600. If your system requires a different latency, voltage, rank or buffering type this kit will not work. Consult the motherboard manual for supported capacities and approved DIMM population order before purchase.

Punti di forza

  • 96 GB capacity with two 48 GB modules for full population
  • DDR5 5600 speed matches the motherboard's rated frequency
  • CL46 CAS latency and 1.1 V voltage meet the controller's timing spec
  • 2Rx8 registered ECC RDIMM architecture enables error correction and signal buffering
  • Verified fitment for the GIGABYTE MZ73-LM1 motherboard's 288-pin RDIMM slots

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What speed does the DDR5 5600 PC5-44800 interface actually run at in this kit?

The modules operate at DDR5 5600 (PC5-44800) with a CAS latency of CL46, delivering the rated transfer rate when installed in a compatible system.

What physical slot and form factor does this 288-pin RDIMM kit require on the GIGABYTE MZ73-LM1 motherboard?

It uses standard 288-pin DDR5 RDIMM slots; the board must accept registered DIMMs, not UDIMM or SODIMM, and the two 48 GB modules populate the supported DIMM sockets.

How do I install the 2Rx8 registered ECC modules and which population order avoids a common mistake?

Power down, open the chassis, align each 288-pin RDIMM with the keyed slot, press firmly until the latches lock, then follow the motherboard manual's exact DIMM population sequence for dual-rank registered memory.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.