Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 128GB (8 x 16GB) 4800MHz CL40 ECC Registered RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-97D9-KQ51T

128 GB DDR5 registered ECC kit with eight 16 GB modules at 4800 MHz CL40 for the Supermicro H14DST-FL motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Mostra altre 30 configurazioni
  • 128 GB total capacity from eight 16 GB modules
  • DDR5 4800 MHz speed with CL40 latency
  • ECC registered design corrects single-bit errors automatically
  • 1 V operation matches server memory controller requirements
  • Verified fit for Supermicro H14DST-FL motherboard

Server memory kit for Supermicro H14DST-FL

This NEMIX RAM kit delivers 128GB of DDR5 registered ECC memory across eight 16GB modules built for the Supermicro H14DST-FL motherboard. Each RDIMM runs at 4800MHz with CL40 latency at 1.1V using a 1Rx8 organisation that matches the board's memory controller expectations.

Suited for administrators populating all slots

Registered buffering offloads the controller so every channel remains stable when fully loaded, while ECC corrects single-bit errors before they affect production workloads. Systems requiring unbuffered UDIMM or SODIMM form factors cannot use this kit, and boards with different population rules or voltage requirements should look elsewhere.

The registered RDIMM form factor decides fitment

The 288-pin DDR5 RDIMM layout is mandatory for the H14DST-FL; UDIMM or SODIMM modules will not seat or function. Verify your manual for approved population order and maximum supported capacity per channel before ordering.

Punti di forza

  • 128 GB total capacity from eight 16 GB modules
  • DDR5 4800 MHz speed with CL40 latency
  • ECC registered design corrects single-bit errors automatically
  • 1 V operation matches server memory controller requirements
  • Verified fit for Supermicro H14DST-FL motherboard

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Will the DDR5-4800 speed run at full rate on my Supermicro H14DST-FL?

Yes, the kit is spec-matched to the board so all eight slots populate at the rated 4800 MT/s without downclocking.

What does the registered ECC design actually do for server uptime?

Registered buffering lightens the memory controller load while ECC corrects single-bit errors on the fly, preventing silent data corruption and surprise reboots.

Do these 288-pin RDIMMs fit the H14DST-FL DIMM slots?

The modules use the exact 288-pin RDIMM form factor the motherboard requires, so they seat directly without adapters.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.