Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 128GB (8 x 16GB) 4800MHz CL40 ECC Registered RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-97D9-KQ51T

128 GB DDR5 registered ECC kit with eight 16 GB modules at 4800 MHz CL40 for the Supermicro H14DST-FL motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Nog 30 configuraties tonen
  • 128 GB total capacity from eight 16 GB modules
  • DDR5 4800 MHz speed with CL40 latency
  • ECC registered design corrects single-bit errors automatically
  • 1 V operation matches server memory controller requirements
  • Verified fit for Supermicro H14DST-FL motherboard

Server memory kit for Supermicro H14DST-FL

This NEMIX RAM kit delivers 128GB of DDR5 registered ECC memory across eight 16GB modules built for the Supermicro H14DST-FL motherboard. Each RDIMM runs at 4800MHz with CL40 latency at 1.1V using a 1Rx8 organisation that matches the board's memory controller expectations.

Suited for administrators populating all slots

Registered buffering offloads the controller so every channel remains stable when fully loaded, while ECC corrects single-bit errors before they affect production workloads. Systems requiring unbuffered UDIMM or SODIMM form factors cannot use this kit, and boards with different population rules or voltage requirements should look elsewhere.

The registered RDIMM form factor decides fitment

The 288-pin DDR5 RDIMM layout is mandatory for the H14DST-FL; UDIMM or SODIMM modules will not seat or function. Verify your manual for approved population order and maximum supported capacity per channel before ordering.

Pluspunten

  • 128 GB total capacity from eight 16 GB modules
  • DDR5 4800 MHz speed with CL40 latency
  • ECC registered design corrects single-bit errors automatically
  • 1 V operation matches server memory controller requirements
  • Verified fit for Supermicro H14DST-FL motherboard

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the DDR5-4800 speed run at full rate on my Supermicro H14DST-FL?

Yes, the kit is spec-matched to the board so all eight slots populate at the rated 4800 MT/s without downclocking.

What does the registered ECC design actually do for server uptime?

Registered buffering lightens the memory controller load while ECC corrects single-bit errors on the fly, preventing silent data corruption and surprise reboots.

Do these 288-pin RDIMMs fit the H14DST-FL DIMM slots?

The modules use the exact 288-pin RDIMM form factor the motherboard requires, so they seat directly without adapters.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.