Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR5 RDIMM modules without heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM DDR5 6400 192GB (2x96GB) ECC RDIMM CL52 1.1V 2Rx4 Supermicro H13SST-GC memory upgrade

SKU CH-RGTT-ABP28

192 GB DDR5-6400 ECC RDIMM kit (2 × 96 GB) validated for Supermicro H13SST-GC, CL52 at 1.1 V

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity from two 96 GB modules enables large in-memory workloads
  • DDR5 6400 speed (PC5-51200) delivers rated throughput for Supermicro H13SST-GC
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors and offloads the memory controller
  • 10 V operation at CL52 matches the platform's exact voltage and timing requirements
  • 288-pin RDIMM form factor fits the server board's DIMM slots without adapters

192GB DDR5 ECC RDIMM kit for Supermicro H13SST-GC

This 192GB kit provides two 96GB DDR5 6400 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SST-GC memory controller expects. It is intended for administrators who need maximum supported capacity on this specific server platform without compatibility guesswork.

288-pin Registered form factor fits the board's

The modules use the 288-pin RDIMM form factor required by the H13SST-GC, not UDIMM or SODIMM. Registered architecture offloads the memory controller so every slot can run fully populated at rated speed, while ECC corrects single-bit errors on the fly. Consult the motherboard manual for approved population order before installation.

6400 speed with CL52 latency at 1.1V

The kit operates at DDR5 6400 (PC5-51200) with CL52 latency and 1.1V, delivering the bandwidth and stability the platform specifies. It comfortably handles memory-intensive workloads such as virtualization, databases and large-scale analytics at full 192GB capacity. Systems requiring more than 192GB or a different DIMM type will need a different solution.

Punti di forza

  • 192 GB total capacity from two 96 GB modules enables large in-memory workloads
  • DDR5 6400 speed (PC5-51200) delivers rated throughput for Supermicro H13SST-GC
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors and offloads the memory controller
  • 10 V operation at CL52 matches the platform's exact voltage and timing requirements
  • 288-pin RDIMM form factor fits the server board's DIMM slots without adapters

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Domande su questo articolo

Will the 96GB 2Rx4 RDIMMs populate all 13 slots on the Supermicro H13SST-GC at full DDR5 6400 speed?

The kit is validated for the H13SST-GC; the board's memory controller recognises the 2Rx4 organisation and 1.1V timing so all supported slots run at the rated PC5-51200 speed when populated per the manual.

How much heat do these 1.1V CL52 modules add when the server runs 24/7 at full load?

Registered DDR5 at 1.10V and CL52 draws modest power per DIMM; with no heat spreaders the modules rely on standard chassis airflow, which is sufficient for continuous operation in the H13SST-GC.

Does the motherboard need a specific BIOS revision or CPU stepping to boot with this 192GB RDIMM kit?

The modules match the H13SST-GC's required 288-pin RDIMM form factor, ECC, registered design and DDR5 6400 spec; the manual lists supported capacities and population order for this configuration.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.