SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00499579BTC
재고 있음
NEMIX RAM
NEMIX RAM DDR5 6400 192GB (2x96GB) ECC RDIMM CL52 1.1V 2Rx4 Supermicro H13SST-GC memory upgrade
192 GB DDR5-6400 ECC RDIMM kit (2 × 96 GB) validated for Supermicro H13SST-GC, CL52 at 1.1 V
- Capacity192GB (2 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB total capacity from two 96 GB modules enables large in-memory workloads
- DDR5 6400 speed (PC5-51200) delivers rated throughput for Supermicro H13SST-GC
- Registered ECC design with 2Rx4 organisation corrects single-bit errors and offloads the memory controller
- 10 V operation at CL52 matches the platform's exact voltage and timing requirements
- 288-pin RDIMM form factor fits the server board's DIMM slots without adapters
192GB DDR5 ECC RDIMM kit for Supermicro H13SST-GC
This 192GB kit provides two 96GB DDR5 6400 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SST-GC memory controller expects. It is intended for administrators who need maximum supported capacity on this specific server platform without compatibility guesswork.
288-pin Registered form factor fits the board's
The modules use the 288-pin RDIMM form factor required by the H13SST-GC, not UDIMM or SODIMM. Registered architecture offloads the memory controller so every slot can run fully populated at rated speed, while ECC corrects single-bit errors on the fly. Consult the motherboard manual for approved population order before installation.
6400 speed with CL52 latency at 1.1V
The kit operates at DDR5 6400 (PC5-51200) with CL52 latency and 1.1V, delivering the bandwidth and stability the platform specifies. It comfortably handles memory-intensive workloads such as virtualization, databases and large-scale analytics at full 192GB capacity. Systems requiring more than 192GB or a different DIMM type will need a different solution.
주요 특징
- 192 GB total capacity from two 96 GB modules enables large in-memory workloads
- DDR5 6400 speed (PC5-51200) delivers rated throughput for Supermicro H13SST-GC
- Registered ECC design with 2Rx4 organisation corrects single-bit errors and offloads the memory controller
- 10 V operation at CL52 matches the platform's exact voltage and timing requirements
- 288-pin RDIMM form factor fits the server board's DIMM slots without adapters
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Will the 96GB 2Rx4 RDIMMs populate all 13 slots on the Supermicro H13SST-GC at full DDR5 6400 speed?
The kit is validated for the H13SST-GC; the board's memory controller recognises the 2Rx4 organisation and 1.1V timing so all supported slots run at the rated PC5-51200 speed when populated per the manual.
How much heat do these 1.1V CL52 modules add when the server runs 24/7 at full load?
Registered DDR5 at 1.10V and CL52 draws modest power per DIMM; with no heat spreaders the modules rely on standard chassis airflow, which is sufficient for continuous operation in the H13SST-GC.
Does the motherboard need a specific BIOS revision or CPU stepping to boot with this 192GB RDIMM kit?
The modules match the H13SST-GC's required 288-pin RDIMM form factor, ECC, registered design and DDR5 6400 spec; the manual lists supported capacities and population order for this configuration.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
