Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black square 120 mm 25 mm 12 V .6 A 2 pin cooling fan

OEM Industries

OEM Industries 120×25 mm 12V .6 A 2-pin fan

SKU CH-370B-D8XT5

A 120 mm square cooling fan with sleeve bearing, 12 V .6 A draw and a 2-pin power connector

  • ColorBlack
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • 120 mm square frame fits standard mounts
  • 12 V .6 A rating keeps power draw low
  • Sleeve bearing runs quietly at idle
  • 2-pin connector plugs straight into board
  • Black finish blends into any build

120×25 mm 12 V 0.6 A fan

This square frame cooling fan measures 120 by 25 mm and runs on 12 V at 0.6 A. It uses a two-pin power connector and a sleeve bearing for rotation. The unit is supplied in black with no LED illumination.

Who this suits and who it does not

Builders needing a basic 120 mm case or heatsink fan with a two-pin header will find it compatible. Buyers who want speed control via PWM or a three-pin tachometer signal cannot use this model. Systems that require a fluid-dynamic or ball bearing for lower noise should look at other designs.

Deciding specification — two-pin fixed voltage

The two-pin connector means the fan receives constant 12 V and cannot report its speed to the motherboard. If your header or controller expects a third wire for monitoring or PWM, this part will not meet that requirement.

Punti di forza

  • 120 mm square frame fits standard mounts
  • 12 V .6 A rating keeps power draw low
  • Sleeve bearing runs quietly at idle
  • 2-pin connector plugs straight into board
  • Black finish blends into any build

Caratteristiche tecniche

Brand1225M12S-ND1
Model1225M12S
ColorBlack
TypeFan only
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Domande su questo articolo

Will the 120 mm square frame with 2-pin connector fit the mounting holes on my older case?

The fan uses a standard 120 mm square frame and a 2-pin power connector, matching the mounting pattern and header found on most legacy cases and motherboards.

How can I confirm the 12 V .6 A sleeve-bearing fan is spinning correctly after installation?

Power the system and verify the blades rotate smoothly; listen for quiet operation from the sleeve bearing and check that the 2-pin header reports a steady RPM in BIOS or monitoring software.

Does the package include only the 12025 fan or are screws and adapters supplied as well?

The box contains the 12025 square cooling fan itself; mounting screws and any 2-pin to 3-pin adapters must be purchased separately if your chassis or board requires them.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.