Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black square 120 mm 25 mm 12 V .6 A 2 pin cooling fan

OEM Industries

OEM Industries 120×25 mm 12V .6 A 2-pin fan

SKU CH-370B-D8XT5

A 120 mm square cooling fan with sleeve bearing, 12 V .6 A draw and a 2-pin power connector

  • ColorBlack
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • 120 mm square frame fits standard mounts
  • 12 V .6 A rating keeps power draw low
  • Sleeve bearing runs quietly at idle
  • 2-pin connector plugs straight into board
  • Black finish blends into any build

120×25 mm 12 V 0.6 A fan

This square frame cooling fan measures 120 by 25 mm and runs on 12 V at 0.6 A. It uses a two-pin power connector and a sleeve bearing for rotation. The unit is supplied in black with no LED illumination.

Who this suits and who it does not

Builders needing a basic 120 mm case or heatsink fan with a two-pin header will find it compatible. Buyers who want speed control via PWM or a three-pin tachometer signal cannot use this model. Systems that require a fluid-dynamic or ball bearing for lower noise should look at other designs.

Deciding specification — two-pin fixed voltage

The two-pin connector means the fan receives constant 12 V and cannot report its speed to the motherboard. If your header or controller expects a third wire for monitoring or PWM, this part will not meet that requirement.

Pluspunten

  • 120 mm square frame fits standard mounts
  • 12 V .6 A rating keeps power draw low
  • Sleeve bearing runs quietly at idle
  • 2-pin connector plugs straight into board
  • Black finish blends into any build

Specificaties

Brand1225M12S-ND1
Model1225M12S
ColorBlack
TypeFan only
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Vragen over dit artikel

Will the 120 mm square frame with 2-pin connector fit the mounting holes on my older case?

The fan uses a standard 120 mm square frame and a 2-pin power connector, matching the mounting pattern and header found on most legacy cases and motherboards.

How can I confirm the 12 V .6 A sleeve-bearing fan is spinning correctly after installation?

Power the system and verify the blades rotate smoothly; listen for quiet operation from the sleeve bearing and check that the 2-pin header reports a steady RPM in BIOS or monitoring software.

Does the package include only the 12025 fan or are screws and adapters supplied as well?

The box contains the 12025 square cooling fan itself; mounting screws and any 2-pin to 3-pin adapters must be purchased separately if your chassis or board requires them.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.