Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OEM Industries
A 92 mm dual ball-bearing fan delivering 12 V, 0.63 A airflow with a 3-pin connector for CPU cooling
The OEM Industries EFB0912HHE is a 92 mm square fan designed for CPU air-cooling assemblies. It runs on 12 V DC and draws 0.63 A for a rated 7.5 W of power. The unit ships as a bare fan without heatsink or mounting hardware. It suits builders replacing a worn cooler fan or assembling a custom low-profile thermal solution.
Double ball bearings give the rotor a durable, low-friction platform for continuous operation. The 38 mm thick frame fits standard 90 mm mounting holes found on many legacy and small-form-factor heatsinks. A three-pin connector supplies tachometer feedback so the motherboard can monitor speed, though voltage control remains the only regulation method.
This model matches the 90×90×38 mm footprint and 12 V 0.63 A electrical profile of the original Delta EFB0912HHE. It restores factory airflow and acoustic performance when the OEM fan fails. The jump is worthwhile only when the existing heatsink is otherwise sound; builders needing higher static pressure or PWM control should look elsewhere.
| Model | EFB0912HHE |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 92mm |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| LED | No |
The 3-pin connector supplies 12 V power and a tachometer signal but lacks PWM control, so speed varies only with voltage changes.
The fan housing measures 90 mm by 90 mm with a 38 mm thickness, matching standard 92 mm mounting holes.
Screw the fan into the 90 mm mounting pattern, connect the 3-pin header, then enable voltage-based speed control in BIOS instead of leaving it on PWM mode.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?