Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OEM Industries
A 92 mm dual ball-bearing fan delivering 12 V, 0.63 A airflow with a 3-pin connector for CPU cooling
The OEM Industries EFB0912HHE is a 92 mm square fan designed for CPU air-cooling assemblies. It runs on 12 V DC and draws 0.63 A for a rated 7.5 W of power. The unit ships as a bare fan without heatsink or mounting hardware. It suits builders replacing a worn cooler fan or assembling a custom low-profile thermal solution.
Double ball bearings give the rotor a durable, low-friction platform for continuous operation. The 38 mm thick frame fits standard 90 mm mounting holes found on many legacy and small-form-factor heatsinks. A three-pin connector supplies tachometer feedback so the motherboard can monitor speed, though voltage control remains the only regulation method.
This model matches the 90×90×38 mm footprint and 12 V 0.63 A electrical profile of the original Delta EFB0912HHE. It restores factory airflow and acoustic performance when the OEM fan fails. The jump is worthwhile only when the existing heatsink is otherwise sound; builders needing higher static pressure or PWM control should look elsewhere.
| Model | EFB0912HHE |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 92mm |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| LED | No |
The 3-pin connector supplies 12 V power and a tachometer signal but lacks PWM control, so speed varies only with voltage changes.
The fan housing measures 90 mm by 90 mm with a 38 mm thickness, matching standard 92 mm mounting holes.
Screw the fan into the 90 mm mounting pattern, connect the 3-pin header, then enable voltage-based speed control in BIOS instead of leaving it on PWM mode.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?