Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Small black square cooling fan fifty by fifty by ten millimetres with three power wires

OEM Industries

OEM Industries RDH5010S 50x50x10mm 12V 0.16A 3-Wire Fan

SKU CH-RAZJ-YQV8H

A 50x50x10mm DC sleeve-bearing cooling fan running at 12V with a 3-wire power connector

  • ColorBlack
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector3 Wires
  • LEDNo
  • Compact 50 mm square frame fits tight chassis spaces
  • Low 0.16 A draw reduces 12 V rail load
  • Three-wire connector enables speed monitoring
  • Sleeve bearing keeps acoustic profile quiet
  • 10 mm slim depth suits low-profile coolers

Compact 50 mm Frame for Tight Builds

The OEM Industries RDH5010S is a 50 by 50 by 10 millimetre DC fan built for confined cooling tasks. Its sleeve bearing and three-wire connector suit low-profile CPU coolers, small-form-factor cases or replacement duties where space is at a premium. Buyers needing a thin, 12 V fan for a specific mounting pattern will find the dimensions match the listed 5010 form factor.

Verify Voltage Connector and Mounting Holes

Confirm that the target header supplies 12 V and accepts a three-wire plug before ordering. The 50 mm square footprint requires matching screw holes or clips on the heatsink or chassis. No LED lighting or PWM control is present, so speed reporting is the only signal returned to the motherboard.

Sleeve Bearing Noise and Low Power Draw

The sleeve bearing runs quietly at typical speeds while drawing 0.16 A at 12 V. In normal use the fan adds minimal acoustic output and negligible load to the power budget. Expect a steady airflow suited to modest thermal loads rather than high-static-pressure scenarios.

Punti di forza

  • Compact 50 mm square frame fits tight chassis spaces
  • Low 0.16 A draw reduces 12 V rail load
  • Three-wire connector enables speed monitoring
  • Sleeve bearing keeps acoustic profile quiet
  • 10 mm slim depth suits low-profile coolers

Caratteristiche tecniche

ModelRDH5010S
ColorBlack
TypeFan only
Bearing TypeSleeve Bearing
Power Connector3 Wires
LEDNo

Domande su questo articolo

Does the RDH5010S ship with screws or a mounting bracket, or do I need to buy them separately?

The fan is supplied as the fan unit only; mounting screws or brackets are not included and must be sourced separately.

How do I decide between this 50 mm sleeve-bearing model and a larger or ball-bearing alternative?

Choose this 50×50×10 mm sleeve-bearing fan when space is limited to a 50 mm frame and low noise at modest airflow is acceptable; larger or ball-bearing fans suit higher heat loads or longer life requirements.

What does the 12 V 0.16 A rating mean for actual cooling performance in a PC?

At 12 V the fan draws 0.16 A, providing low-speed airflow suited to chipset heatsinks, small form-factor cases or supplementary ventilation rather than primary CPU cooling.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.