Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small black square cooling fan fifty by fifty by ten millimetres with three power wires

OEM Industries

OEM Industries RDH5010S 50x50x10mm 12V 0.16A 3-Wire Fan

SKU CH-RAZJ-YQV8H

A 50x50x10mm DC sleeve-bearing cooling fan running at 12V with a 3-wire power connector

  • ColorBlack
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector3 Wires
  • LEDNo
  • Compact 50 mm square frame fits tight chassis spaces
  • Low 0.16 A draw reduces 12 V rail load
  • Three-wire connector enables speed monitoring
  • Sleeve bearing keeps acoustic profile quiet
  • 10 mm slim depth suits low-profile coolers

Compact 50 mm Frame for Tight Builds

The OEM Industries RDH5010S is a 50 by 50 by 10 millimetre DC fan built for confined cooling tasks. Its sleeve bearing and three-wire connector suit low-profile CPU coolers, small-form-factor cases or replacement duties where space is at a premium. Buyers needing a thin, 12 V fan for a specific mounting pattern will find the dimensions match the listed 5010 form factor.

Verify Voltage Connector and Mounting Holes

Confirm that the target header supplies 12 V and accepts a three-wire plug before ordering. The 50 mm square footprint requires matching screw holes or clips on the heatsink or chassis. No LED lighting or PWM control is present, so speed reporting is the only signal returned to the motherboard.

Sleeve Bearing Noise and Low Power Draw

The sleeve bearing runs quietly at typical speeds while drawing 0.16 A at 12 V. In normal use the fan adds minimal acoustic output and negligible load to the power budget. Expect a steady airflow suited to modest thermal loads rather than high-static-pressure scenarios.

Pluspunten

  • Compact 50 mm square frame fits tight chassis spaces
  • Low 0.16 A draw reduces 12 V rail load
  • Three-wire connector enables speed monitoring
  • Sleeve bearing keeps acoustic profile quiet
  • 10 mm slim depth suits low-profile coolers

Specificaties

ModelRDH5010S
ColorBlack
TypeFan only
Bearing TypeSleeve Bearing
Power Connector3 Wires
LEDNo

Vragen over dit artikel

Does the RDH5010S ship with screws or a mounting bracket, or do I need to buy them separately?

The fan is supplied as the fan unit only; mounting screws or brackets are not included and must be sourced separately.

How do I decide between this 50 mm sleeve-bearing model and a larger or ball-bearing alternative?

Choose this 50×50×10 mm sleeve-bearing fan when space is limited to a 50 mm frame and low noise at modest airflow is acceptable; larger or ball-bearing fans suit higher heat loads or longer life requirements.

What does the 12 V 0.16 A rating mean for actual cooling performance in a PC?

At 12 V the fan draws 0.16 A, providing low-speed airflow suited to chipset heatsinks, small form-factor cases or supplementary ventilation rather than primary CPU cooling.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.