Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR4 ECC UDIMM sticks, gold contacts, no heat spreader

OWC

OWC 16GB (2x8GB) DDR4 2666MHz ECC UDIMM memory upgrade

SKU CH-4RX5-F09M5

ECC UDIMM kit adds 16 GB of DDR4 2666 CL19 memory to compatible Synology RackStation NAS models

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16 GB kit (2 × 8 GB) expands NAS capacity
  • DDR4 2666 MHz CL19 delivers fast data throughput
  • ECC unbuffered design protects data integrity
  • 2 V low voltage reduces power draw
  • Validated for Synology RS2421+ and RS2421RP+

OWC 16GB DDR4 2666MHz ECC kit

This 16GB kit contains two 8GB DDR4 2666MHz ECC UDIMM modules built for Synology RackStation RS2421+ and RS2421RP+ systems. It targets administrators who need error-correcting memory to protect data integrity in NAS workloads. The unbuffered design fits the qualified platforms without registration overhead.

Capacity and headroom for NAS workloads

Sixteen gigabytes expands the memory pool available for file caching, virtual machines and containerised services on the supported RackStation units. The dual-rank 1Rx8 organisation and CL19 latency deliver stable throughput for typical multi-user access patterns. Workloads that exceed 16GB will still page to storage, so larger datasets need additional modules or a platform with higher maximum capacity.

DDR4 2666MHz interface limits

The modules operate at the JEDEC-standard DDR4 2666 (PC4-21300) data rate and fall back to 2400MHz or 2133MHz when the memory controller requires it. ECC parity generation adds a small latency penalty compared with non-ECC UDIMMs at the same frequency. The 288-pin unbuffered form factor cannot be used in registered or load-reduced DIMM slots, so platform compatibility must be verified before purchase.

Punti di forza

  • 16 GB kit (2 × 8 GB) expands NAS capacity
  • DDR4 2666 MHz CL19 delivers fast data throughput
  • ECC unbuffered design protects data integrity
  • 2 V low voltage reduces power draw
  • Validated for Synology RS2421+ and RS2421RP+

Caratteristiche tecniche

BrandOWC
Part Number2E6D41R8016P
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology RackstationRS2421+
Synology RackstationRS2421RP+

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Will this DDR4 2666 kit run alongside my existing 2133MHz or 2400MHz modules in the Synology RS2421+?

The kit is backward compatible with 2133MHz and 2400MHz speeds, so it will downclock to match slower modules already installed.

How can I verify the ECC UDIMM is recognised correctly after installation?

Open Synology DSM and check the Info Center or Resource Monitor; they will display the new 16GB total and confirm ECC is active.

Does the package contain only the two 8GB sticks or are tools and cables included?

The box contains the two 288-pin DDR4 ECC UDIMM modules; no tools, cables or heat spreaders are supplied.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.