我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

OWC

OWC 16GB (2x8GB) DDR4 2666MHz ECC UDIMM memory upgrade

SKU CH-4RX5-F09M5

ECC UDIMM kit adds 16 GB of DDR4 2666 CL19 memory to compatible Synology RackStation NAS models

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16 GB kit (2 × 8 GB) expands NAS capacity
  • DDR4 2666 MHz CL19 delivers fast data throughput
  • ECC unbuffered design protects data integrity
  • 2 V low voltage reduces power draw
  • Validated for Synology RS2421+ and RS2421RP+

OWC 16GB DDR4 2666MHz ECC kit

This 16GB kit contains two 8GB DDR4 2666MHz ECC UDIMM modules built for Synology RackStation RS2421+ and RS2421RP+ systems. It targets administrators who need error-correcting memory to protect data integrity in NAS workloads. The unbuffered design fits the qualified platforms without registration overhead.

Capacity and headroom for NAS workloads

Sixteen gigabytes expands the memory pool available for file caching, virtual machines and containerised services on the supported RackStation units. The dual-rank 1Rx8 organisation and CL19 latency deliver stable throughput for typical multi-user access patterns. Workloads that exceed 16GB will still page to storage, so larger datasets need additional modules or a platform with higher maximum capacity.

DDR4 2666MHz interface limits

The modules operate at the JEDEC-standard DDR4 2666 (PC4-21300) data rate and fall back to 2400MHz or 2133MHz when the memory controller requires it. ECC parity generation adds a small latency penalty compared with non-ECC UDIMMs at the same frequency. The 288-pin unbuffered form factor cannot be used in registered or load-reduced DIMM slots, so platform compatibility must be verified before purchase.

商品特色

  • 16 GB kit (2 × 8 GB) expands NAS capacity
  • DDR4 2666 MHz CL19 delivers fast data throughput
  • ECC unbuffered design protects data integrity
  • 2 V low voltage reduces power draw
  • Validated for Synology RS2421+ and RS2421RP+

商品規格

BrandOWC
Part Number2E6D41R8016P
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology RackstationRS2421+
Synology RackstationRS2421RP+

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will this DDR4 2666 kit run alongside my existing 2133MHz or 2400MHz modules in the Synology RS2421+?

The kit is backward compatible with 2133MHz and 2400MHz speeds, so it will downclock to match slower modules already installed.

How can I verify the ECC UDIMM is recognised correctly after installation?

Open Synology DSM and check the Info Center or Resource Monitor; they will display the new 16GB total and confirm ECC is active.

Does the package contain only the two 8GB sticks or are tools and cables included?

The box contains the two 288-pin DDR4 ECC UDIMM modules; no tools, cables or heat spreaders are supplied.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。