Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

OWC

OWC 16GB (4x4GB) DDR2 667 PC2-5300 CL5 200-pin SODIMM Kit

SKU CH-CP1M-7NTTE

A 16 GB DDR2 667 laptop memory kit with four 4 GB SO-DIMM modules rated at CL5 and 1.8 V

  • Capacity16GB (4 x 4GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.8V
  • ECCNo

Capacity 16GB (4 x 4GB)

  • 16 GB total capacity across four 4 GB modules
  • DDR2 667 speed rated at PC2-5300 for compatible laptops
  • CL5 CAS latency at 1.8 V unbuffered operation
  • 200-pin SODIMM form factor fits select notebook and all-in-one systems
  • JEDEC and RoHS compliant for warranty-safe upgrades

Kit Composition and Purpose

This OWC kit supplies 16GB of DDR2 laptop memory arranged as four 4GB SODIMM modules. The 200-pin form factor fits compatible notebooks and all-in-one systems that accept DDR2 667 PC2-5300 CL5 unbuffered non-ECC RAM at 1.8V.

Who Benefits and Who Does Not

Upgraders with four available slots on a DDR2 platform gain the full 16GB capacity in a matched set. Systems limited to two slots or requiring a different DDR generation cannot use this kit as intended.

Deciding Specification

The modules run at DDR2 667 with a PC2-5300 rating and CL5 latency, so the motherboard must explicitly support that speed and timing combination for the kit to operate correctly.

Punti di forza

  • 16 GB total capacity across four 4 GB modules
  • DDR2 667 speed rated at PC2-5300 for compatible laptops
  • CL5 CAS latency at 1.8 V unbuffered operation
  • 200-pin SODIMM form factor fits select notebook and all-in-one systems
  • JEDEC and RoHS compliant for warranty-safe upgrades

Caratteristiche tecniche

BrandOWC
Part Number5S3D22R8016S
Capacity16GB (4 x 4GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
Recommend UseLaptops, All-in-One Systems, and NAS Systems

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How do I install the 200-pin SODIMM modules and what step is often missed?

Power off the laptop, remove the battery if accessible, open the memory door, align the notch on each 200-pin module with the slot key, press firmly until the side clips click, then replace the door and battery before booting.

What maintenance or replacement will the 1.8 V DDR2 kit need later?

No routine maintenance is required; the unbuffered non-ECC modules are solid-state. If a module fails, replace it with an identical 4 GB DDR2 667 CL5 200-pin stick to keep dual-channel operation.

What limit appears first under sustained use with the CL5 667 MT/s rating?

The DDR2 667 speed and CL5 latency set the bandwidth ceiling; under heavy sustained loads the memory bus saturates before the 1.8 V modules reach any thermal limit.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.