OWC 4GB DDR2 800 PC2-6400 CL6 2Rx8 200-pin 1.8V SODIMM laptop RAM
- 4GB
- 200-Pin DDR2 SO-DIMM
Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.
OWC
A 16 GB DDR2 667 laptop memory kit with four 4 GB SO-DIMM modules rated at CL5 and 1.8 V
Capacity 16GB (4 x 4GB)
This OWC kit supplies 16GB of DDR2 laptop memory arranged as four 4GB SODIMM modules. The 200-pin form factor fits compatible notebooks and all-in-one systems that accept DDR2 667 PC2-5300 CL5 unbuffered non-ECC RAM at 1.8V.
Upgraders with four available slots on a DDR2 platform gain the full 16GB capacity in a matched set. Systems limited to two slots or requiring a different DDR generation cannot use this kit as intended.
The modules run at DDR2 667 with a PC2-5300 rating and CL5 latency, so the motherboard must explicitly support that speed and timing combination for the kit to operate correctly.
| Brand | OWC |
|---|---|
| Part Number | 5S3D22R8016S |
| Capacity | 16GB (4 x 4GB) |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Outras versões deste modelo
Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.
Power off the laptop, remove the battery if accessible, open the memory door, align the notch on each 200-pin module with the slot key, press firmly until the side clips click, then replace the door and battery before booting.
No routine maintenance is required; the unbuffered non-ECC modules are solid-state. If a module fails, replace it with an identical 4 GB DDR2 667 CL5 200-pin stick to keep dual-channel operation.
The DDR2 667 speed and CL5 latency set the bandwidth ceiling; under heavy sustained loads the memory bus saturates before the 1.8 V modules reach any thermal limit.
Também nesta secção
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
O que paga, e a moeda em que vê os preços.
Enviado da sua carteira ao finalizar a compra
Apenas informativo — o catálogo está em dólares
Nenhuma moeda corresponde.
Escolha o idioma em que o site lhe fala.
Nenhum idioma corresponde.
Ainda não tem conta?
Já tem conta?
Não existe reposição automática: esta loja não envia qualquer e-mail, pelo que não há nenhum link de utilização única para pedir. Deixe o endereço na conta e ele será tratado manualmente.
Pedido registado
Não vai chegar nada à sua caixa de entrada — esta loja não envia qualquer e-mail. Alguém trata disto manualmente.
Recordou-se dela?