Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board with black memory chips and gold edge contacts

OWC

OWC 16GB DDR4 2400MHz ECC Registered RDIMM 2Rx8 CL17 1.2V 288pin memory upgrade

SKU CH-PBGP-NWWT9

16 GB DDR4 ECC registered RDIMM for Supermicro X10 server motherboards at 2400 MHz CL17

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • 16 GB capacity expands server memory for larger workloads
  • DDR4 2400 MHz CL17 speed delivers responsive data throughput
  • ECC registered design detects and corrects errors for uptime
  • 2 V operation reduces power draw and heat output
  • Validated for Supermicro X10DRi and X10DRL motherboards

16GB DDR4 ECC RDIMM for Supermicro X10

This 16GB DDR4 2400MHz ECC registered DIMM is built for Supermicro X10 series motherboards including the X10DRi-LN4+, X10DRi-T4+, X10DRL-C, X10DRL-CT and X10DRL-iT. It operates at 1.2V with CL17 latency and uses a 2Rx8 organisation. The module follows JEDEC standards and is intended for server or workstation upgrades.

Suited for registered ECC platforms only

This memory fits systems that require registered ECC DDR4 RDIMMs and will not work in standard desktop boards that accept only unbuffered non-ECC modules. It cannot be mixed with unbuffered memory. Buyers who need unbuffered ECC or non-ECC DIMMs for consumer platforms should look elsewhere.

Check motherboard model and memory rules

Verify that your board is one of the five listed Supermicro X10 models before ordering. Confirm the system requires registered ECC RDIMMs and that the memory population rules allow a 16GB 2Rx8 module in the target slot. Ensure the BIOS is current enough to support the installed capacity.

Punti di forza

  • 16 GB capacity expands server memory for larger workloads
  • DDR4 2400 MHz CL17 speed delivers responsive data throughput
  • ECC registered design detects and corrects errors for uptime
  • 2 V operation reduces power draw and heat output
  • Validated for Supermicro X10DRi and X10DRL motherboards

Caratteristiche tecniche

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10DRi-LN4+
Supermicro Motherboard X10DRi-T4+
Supermicro Motherboard X10DRL-C
Supermicro Motherboard X10DRL-CT
Supermicro Motherboard X10DRL-iT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Which Supermicro motherboards must I already own for this 288-pin DDR4 ECC RDIMM to work?

This module is validated for Supermicro X10DRi-LN4+, X10DRi-T4+, X10DRL-C, X10DRL-CT and X10DRL-iT motherboards.

Can I keep my existing unbuffered DDR4 modules and add this 2Rx8 CL17 registered stick alongside them?

No, registered ECC memory cannot be mixed with unbuffered modules; all slots must use registered DIMMs.

How do I confirm the 16GB module is running at 2400MHz CL17 and 1.2V after installation?

Check the BIOS memory information or run a tool such as CPU-Z to verify speed, latency and voltage.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.