暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge contacts

OWC

OWC 16GB DDR4 2400MHz ECC Registered RDIMM 2Rx8 CL17 1.2V 288pin memory upgrade

SKU CH-PBGP-NWWT9

16 GB DDR4 ECC registered RDIMM for Supermicro X10 server motherboards at 2400 MHz CL17

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • 16 GB capacity expands server memory for larger workloads
  • DDR4 2400 MHz CL17 speed delivers responsive data throughput
  • ECC registered design detects and corrects errors for uptime
  • 2 V operation reduces power draw and heat output
  • Validated for Supermicro X10DRi and X10DRL motherboards

16GB DDR4 ECC RDIMM for Supermicro X10

This 16GB DDR4 2400MHz ECC registered DIMM is built for Supermicro X10 series motherboards including the X10DRi-LN4+, X10DRi-T4+, X10DRL-C, X10DRL-CT and X10DRL-iT. It operates at 1.2V with CL17 latency and uses a 2Rx8 organisation. The module follows JEDEC standards and is intended for server or workstation upgrades.

Suited for registered ECC platforms only

This memory fits systems that require registered ECC DDR4 RDIMMs and will not work in standard desktop boards that accept only unbuffered non-ECC modules. It cannot be mixed with unbuffered memory. Buyers who need unbuffered ECC or non-ECC DIMMs for consumer platforms should look elsewhere.

Check motherboard model and memory rules

Verify that your board is one of the five listed Supermicro X10 models before ordering. Confirm the system requires registered ECC RDIMMs and that the memory population rules allow a 16GB 2Rx8 module in the target slot. Ensure the BIOS is current enough to support the installed capacity.

特長

  • 16 GB capacity expands server memory for larger workloads
  • DDR4 2400 MHz CL17 speed delivers responsive data throughput
  • ECC registered design detects and corrects errors for uptime
  • 2 V operation reduces power draw and heat output
  • Validated for Supermicro X10DRi and X10DRL motherboards

仕様

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10DRi-LN4+
Supermicro Motherboard X10DRi-T4+
Supermicro Motherboard X10DRL-C
Supermicro Motherboard X10DRL-CT
Supermicro Motherboard X10DRL-iT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Which Supermicro motherboards must I already own for this 288-pin DDR4 ECC RDIMM to work?

This module is validated for Supermicro X10DRi-LN4+, X10DRi-T4+, X10DRL-C, X10DRL-CT and X10DRL-iT motherboards.

Can I keep my existing unbuffered DDR4 modules and add this 2Rx8 CL17 registered stick alongside them?

No, registered ECC memory cannot be mixed with unbuffered modules; all slots must use registered DIMMs.

How do I confirm the 16GB module is running at 2400MHz CL17 and 1.2V after installation?

Check the BIOS memory information or run a tool such as CPU-Z to verify speed, latency and voltage.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。