Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR4 UDIMM sticks, no heat spreaders, gold contacts, 288 pins

OWC

OWC 2E6D41R8016P 16GB (2x8GB) DDR4 2666MHz CL19 ECC UDIMM 1.2V 1Rx8 288-pin memory upgrade

SKU CH-GVRP-TYX45

16 GB DDR4-2666 ECC UDIMM kit (2 × 8 GB, CL19, 1.2 V) validated for Synology RackStation RS1619xs+ and RS2818RP+

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16 GB kit (2 × 8 GB) for Synology RS1619xs+ and RS2818RP+
  • DDR4 2666 MHz CL19 ECC unbuffered UDIMM for data integrity
  • JEDEC-standard 1.2 V modules run cool without heat spreaders
  • Backward compatible with 2133 MHz and 2400 MHz systems
  • 288-pin 1Rx8 design installs easily in supported NAS units

Synology RackStation memory kit

This OWC kit delivers 16 GB of DDR4 ECC UDIMM memory in a matched pair of 8 GB modules. It is validated for Synology RackStation RS1619xs+ and RS2818RP+ systems. The modules run at 2666 MHz with CL19 latency at 1.2 V.

Upgrade from lower-capacity or non-ECC DIMMs

The 16 GB dual-channel kit replaces smaller or single-rank modules to raise total system memory. The jump is worth it when workloads such as virtual machines, container hosts or large file caches exceed the existing capacity and trigger swapping.

DDR4 2666 interface limits

The DDR4 2666 interface caps peak bandwidth at the PC4-21300 rate. The kit is backward compatible with 2133 MHz and 2400 MHz slots, but will operate at the lowest common speed. ECC protection adds single-bit correction without registered buffering overhead.

Punti di forza

  • 16 GB kit (2 × 8 GB) for Synology RS1619xs+ and RS2818RP+
  • DDR4 2666 MHz CL19 ECC unbuffered UDIMM for data integrity
  • JEDEC-standard 1.2 V modules run cool without heat spreaders
  • Backward compatible with 2133 MHz and 2400 MHz systems
  • 288-pin 1Rx8 design installs easily in supported NAS units

Caratteristiche tecniche

BrandOWC
Part Number2E6D41R8016P
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology RackstationRS1619xs+
Synology RackstationRS2818RP+

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Will the 288-pin DDR4 UDIMM fit the memory slots in my Synology RS1619xs+?

Yes, the 288-pin DDR4 ECC UDIMM form factor matches the DIMM slots used in the Synology RS1619xs+ and RS2818RP+.

What is the correct way to seat the modules so the system recognises both 8GB sticks?

Align the notch on each module with the slot key, press down firmly until the side clips click shut on both ends.

Does the lack of a heat spreader mean I should plan to add active cooling later?

No, the modules run at standard 1.2V JEDEC voltage and are designed for passive airflow inside the NAS chassis.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.