Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
White 120 mm square PWM case fan with nine angled blades and eight rubber corner dampers

Phanteks

Phanteks PH-F120MP_BK_PWM 120 mm PWM case fan 500-1800 rpm 53.3 CFM 25 dB UFB bearing

SKU CH-2KM7-M1X8Y MPN PH-F120MP_BK_PWM

A 120 mm PWM case fan with UFB bearing delivering 53.3 CFM at 500-1800 rpm and 25 dB noise

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeRadiator Fan
  • CompatibilityRadiator, Case
  • Fan Thickness25mm
  • Bearing TypeUFB (Updraft Floating Balance)
  • High static pressure clears dense radiator fins
  • PWM control adjusts speed from 500 to 1800 rpm
  • UFB bearing gives longer life and stable rotation
  • 3 CFM airflow at only 25 dB noise
  • Eight larger rubber dampers cut vibration further

120 mm PWM radiator fan

The Phanteks PH-F120MP is a 120 mm PWM case fan built for high static pressure. It suits builders who need focused airflow through dense radiator fins or restrictive case meshes. The single fan operates without an external controller. Buyers who want RGB illumination or a bundled multi-fan kit should look elsewhere.

UFB bearing and rubber dampers

The fan uses an Updraft Floating Balance bearing for reduced friction and a longer service life. Eight enlarged rubber pads come pre-installed on the corners to absorb vibration transferred to the chassis. A standard 4-pin connector plugs directly into a motherboard header for PWM control. The 25 mm thickness fits typical 120 mm mounting points.

500-1800 rpm range and 25 dB noise

Speed adjusts between 500 and 1800 rpm with a ±250 rpm tolerance, delivering up to 53.3 CFM of airflow. At typical operating points the acoustic rating is 25 dB(A). The nine-blade Maelström Vortex Booster II design aims to keep turbulence low while maintaining pressure across radiator fins. Power draw scales with the PWM duty cycle set by the board.

Punti di forza

  • High static pressure clears dense radiator fins
  • PWM control adjusts speed from 500 to 1800 rpm
  • UFB bearing gives longer life and stable rotation
  • 3 CFM airflow at only 25 dB noise
  • Eight larger rubber dampers cut vibration further

Caratteristiche tecniche

BrandPhanteks
ModelPH-F120MP
Fan Counts1 Fan
Fan ControllerNo Controller
TypeRadiator Fan
CompatibilityRadiator, Case
Fan Thickness25mm
Bearing TypeUFB (Updraft Floating Balance)
RPM500 - 1800 + / - 250 rpm
Air Flow53.3 CFM
Noise Level25 dB (A)
Power Connector4 Pin
ColorWhite
LEDNon-LED
FeaturesThe PH-F120MP, a high static pressure fan, can have the ability to overcome the airflow restriction caused by high fin density. PH-F120MP produces high static air pressure allowing for a direct and focused airflow making them ideal for the densely packed fins of a radiator.
The PH-F120MP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength, Phanteks redesigned the back frame of the PH-F120MP. Phanteks fans now comes with pre-installed rubber pads to help reduce vibration occurren
Dimensions120.00 x 120.00 x 25.00mm
Peso di spedizione0.24 kg
Dimensioni del pacco203 × 201 × 30 mm

Domande su questo articolo

What does the 4-pin PWM connector let the 500-1800 rpm range actually do?

The 4-pin PWM connector lets the motherboard vary the speed continuously between 500 and 1800 rpm so the fan only spins as fast as the thermal load requires.

Will the 25 mm thickness and 120 mm square frame clear my radiator and case mounts?

Yes — the fan measures 120 x 120 x 25 mm, the standard size for 120 mm radiator and case mounting holes.

How do I fit the eight pre-installed rubber pads so they actually damp vibration?

Push each rubber pad through the fan's corner holes until the flange seats flat, then mount the fan with the pads sandwiched between frame and radiator or case.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.