Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
White fully modular ATX power supply, 140 mm fan, 150 mm deep

Super Flower

Super Flower SF-850F14XP(WH) 850 W ATX 3.1 power supply

SKU CH-J388-PRYFD MPN SF-850F14XP(WH)

Full modular ATX 3.1 power supply delivering 850 W with 80 PLUS Platinum and Cybenetics Platinum efficiency, a 140 mm FDB fan and native 12VHPWR cables for PCIe 5.1 graphics cards

  • ColorWhite
  • TypeATX 3.1 Compatible
  • Maximum Power850 W
  • Fans1 x 140 mm
  • PFCActive
  • Main Connector20+4Pin

Options ATX 3.1 80+ Platinum (850W) White

  • 850 W output with single +12 V rail delivers stable power for demanding builds
  • 80 PLUS Platinum and Cybenetics Platinum ratings ensure 90 % typical efficiency at 50 % load
  • ATX 3.1 and PCIe 5.1 certified with native 12 VHPWR cable for modern GPUs
  • 140 mm fluid-dynamic-bearing fan and 105 °C Japanese capacitors keep noise and heat low
  • Full modular ribbon cables and 150 mm depth simplify cable routing in compact cases

850 W ATX 3.1 Platinum power supply

This fully modular unit delivers 850 W of continuous power with 80 PLUS Platinum and Cybenetics Platinum efficiency ratings. It meets the Intel ATX 3.1 specification and is PCIe 5.1 ready for modern graphics cards. The white finish suits clean, light-themed builds. It is built for enthusiasts who need stable output and high efficiency at typical loads.

Full modular ribbon cables with native 12VHPWR

All cables are detachable ribbon types, including two native 8-pin to 16-pin 12VHPWR leads that plug directly into the PSU without a 16-pin socket on the unit side. This reduces connection bulk and improves seating reliability. The 140 mm fluid dynamic bearing fan runs quietly under load. Standard ATX dimensions of 150 mm depth fit most mid-tower cases.

Single +12 V rail with 850 W headroom

The single-rail design provides the full 850 W on the +12 V line, handling high-end GPUs and multi-core CPUs with room for transient spikes allowed by ATX 3.1. Efficiency peaks at 92% at 50% load (115 V) and 93% at 50% load (230 V). Protection circuits include over-voltage and overload safeguards. Builds requiring more than 850 W or multiple 12VHPWR connectors will need a higher-capacity unit.

Punti di forza

  • 850 W output with single +12 V rail delivers stable power for demanding builds
  • 80 PLUS Platinum and Cybenetics Platinum ratings ensure 90 % typical efficiency at 50 % load
  • ATX 3.1 and PCIe 5.1 certified with native 12 VHPWR cable for modern GPUs
  • 140 mm fluid-dynamic-bearing fan and 105 °C Japanese capacitors keep noise and heat low
  • Full modular ribbon cables and 150 mm depth simplify cable routing in compact cases

Caratteristiche tecniche

BrandSuper Flower
ColorWhite
TypeATX 3.1 Compatible
Maximum Power850 W
Fans1 x 140 mm
PFCActive
Main Connector20+4Pin
+12V RailsSingle
SLISLI Ready
Haswell SupportReady
CrossFireCrossFire Ready
Max PSU Length150 mm
ModularFull Modular
Energy-Efficient80 PLUS PLATINUM Certified
Over Voltage ProtectionYes
Overload ProtectionYes
Input Voltage91 - 264 V
Peso di spedizione3.08 kg
Dimensioni del pacco343 × 178 × 114 mm

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How can I verify the SF-850F14XP(WH) is delivering stable power after installation?

The 140 mm Fluid Dynamic Bearing fan should spin quietly under load and the single +12 V rail will maintain steady voltage; efficiency reaches 90 % at 20 % load, 92 % at 50 % load and 89 % at 100 % load per 80 PLUS Platinum testing.

Which cables and connectors come in the box with the SF-850F14XP(WH) and what must I source separately?

All modular ribbon cables are included, among them a native 12 VHPWR cable built from two 8-pin leads to a 16-pin connector; no extra cables are required for standard ATX 3.1 builds.

Should I choose the white SF-850F14XP(WH) or a different capacity for an ATX 3.1 system with a PCIe 5.1 graphics card?

The white 850 W unit is ATX 3.1 certified and PCIe 5.1 ready, providing a native 12 VHPWR cable; select it when your peak draw fits within 850 W.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.