Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão

Super Flower

Super Flower SF-850F14XP(WH) 850 W ATX 3.1 power supply

SKU CH-J388-PRYFD MPN SF-850F14XP(WH)

Full modular ATX 3.1 power supply delivering 850 W with 80 PLUS Platinum and Cybenetics Platinum efficiency, a 140 mm FDB fan and native 12VHPWR cables for PCIe 5.1 graphics cards

  • ColorWhite
  • TypeATX 3.1 Compatible
  • Maximum Power850 W
  • Fans1 x 140 mm
  • PFCActive
  • Main Connector20+4Pin
  • 850 W output with single +12 V rail delivers stable power for demanding builds
  • 80 PLUS Platinum and Cybenetics Platinum ratings ensure 90 % typical efficiency at 50 % load
  • ATX 3.1 and PCIe 5.1 certified with native 12 VHPWR cable for modern GPUs
  • 140 mm fluid-dynamic-bearing fan and 105 °C Japanese capacitors keep noise and heat low
  • Full modular ribbon cables and 150 mm depth simplify cable routing in compact cases

850 W ATX 3.1 Platinum power supply

This fully modular unit delivers 850 W of continuous power with 80 PLUS Platinum and Cybenetics Platinum efficiency ratings. It meets the Intel ATX 3.1 specification and is PCIe 5.1 ready for modern graphics cards. The white finish suits clean, light-themed builds. It is built for enthusiasts who need stable output and high efficiency at typical loads.

Full modular ribbon cables with native 12VHPWR

All cables are detachable ribbon types, including two native 8-pin to 16-pin 12VHPWR leads that plug directly into the PSU without a 16-pin socket on the unit side. This reduces connection bulk and improves seating reliability. The 140 mm fluid dynamic bearing fan runs quietly under load. Standard ATX dimensions of 150 mm depth fit most mid-tower cases.

Single +12 V rail with 850 W headroom

The single-rail design provides the full 850 W on the +12 V line, handling high-end GPUs and multi-core CPUs with room for transient spikes allowed by ATX 3.1. Efficiency peaks at 92% at 50% load (115 V) and 93% at 50% load (230 V). Protection circuits include over-voltage and overload safeguards. Builds requiring more than 850 W or multiple 12VHPWR connectors will need a higher-capacity unit.

Pontos fortes

  • 850 W output with single +12 V rail delivers stable power for demanding builds
  • 80 PLUS Platinum and Cybenetics Platinum ratings ensure 90 % typical efficiency at 50 % load
  • ATX 3.1 and PCIe 5.1 certified with native 12 VHPWR cable for modern GPUs
  • 140 mm fluid-dynamic-bearing fan and 105 °C Japanese capacitors keep noise and heat low
  • Full modular ribbon cables and 150 mm depth simplify cable routing in compact cases

Especificações

BrandSuper Flower
ColorWhite
TypeATX 3.1 Compatible
Maximum Power850 W
Fans1 x 140 mm
PFCActive
Main Connector20+4Pin
+12V RailsSingle
SLISLI Ready
Haswell SupportReady
CrossFireCrossFire Ready
Max PSU Length150 mm
ModularFull Modular
Energy-Efficient80 PLUS PLATINUM Certified
Over Voltage ProtectionYes
Overload ProtectionYes
Input Voltage91 - 264 V
Peso de envio3.08 kg
Dimensões da embalagem343 × 178 × 114 mm

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How can I verify the SF-850F14XP(WH) is delivering stable power after installation?

The 140 mm Fluid Dynamic Bearing fan should spin quietly under load and the single +12 V rail will maintain steady voltage; efficiency reaches 90 % at 20 % load, 92 % at 50 % load and 89 % at 100 % load per 80 PLUS Platinum testing.

Which cables and connectors come in the box with the SF-850F14XP(WH) and what must I source separately?

All modular ribbon cables are included, among them a native 12 VHPWR cable built from two 8-pin leads to a 16-pin connector; no extra cables are required for standard ATX 3.1 builds.

Should I choose the white SF-850F14XP(WH) or a different capacity for an ATX 3.1 system with a PCIe 5.1 graphics card?

The white 850 W unit is ATX 3.1 certified and PCIe 5.1 ready, providing a native 12 VHPWR cable; select it when your peak draw fits within 850 W.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.